Top-rated welders.

Get matched with top welders in North Baltimore, OH

There are 0 highly-rated local welders.

Matching on Angi

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Welders in North Baltimore

Iron Cobra Welding
No reviews
Iron Cobra Welding
No reviews
2 years of experience

Iron Cobra Welding has over ten years of experience making clients aesthetics into reality with ornamental railing, structural steel, and specialized fabrication. Specializing in residential railing and hand forged designs, we look forward to making your vision come to life. Serving Findlay and the surrounding areas.

Iron Cobra Welding has over ten years of experience making clients aesthetics into reality with ornamental railing, structural steel, and specialized fabrication. Specializing in residential railing and hand forged designs, we look forward to making your vision come to life. Serving Findlay and the surrounding areas.


Andy's Mobile Welding
3215 Frank Rd
5.00(
1
)
Andy's Mobile Welding
3215 Frank Rd
5.00(
1
)
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

"They are very professional, very thorough of what he does. He did a nice job I am very happy."

Aron H on September 2022

"They are very professional, very thorough of what he does. He did a nice job I am very happy."

Aron H on September 2022


Private
No reviews
Private
No reviews
Emergency services offered

I am a private welder, I have expressive knowledge at blueprint reading and fabrication work. I am AWS certified stick welder for pressure pipe. I can also Mig weld. Along with welding I have been in construction the past 7 years and have became a Jack of all traits in the construction world. I take pride in my work and everything I do. My morales are of the highest standard along with my work.

I am a private welder, I have expressive knowledge at blueprint reading and fabrication work. I am AWS certified stick welder for pressure pipe. I can also Mig weld. Along with welding I have been in construction the past 7 years and have became a Jack of all traits in the construction world. I take pride in my work and everything I do. My morales are of the highest standard along with my work.


1 other employee. Does hire sub contractors. Charges by the hour or job depending on the job. No travel/trip charges.


499 Handyman
109 N Main St
No reviews
499 Handyman
109 N Main St
No reviews
24 years of experience

499handyman is a family owned business. We have more than 15 years of experience in the construction, electrical and appliance trades. We offer our handyman services at affordable rates and seek to provide you, our customers, with quality and value! We chose the domain name 499Handyman.com because $499.00 is the most we charge for any job. Our handymen are skilled in everything from appliance repairs to installation of zip lines! If there is a project or some work you would like to have done around your house or place of business, please call us at 951-795-9797. We guarantee our work and offer warranties where applicable. We look forward to earning your business!

499handyman is a family owned business. We have more than 15 years of experience in the construction, electrical and appliance trades. We offer our handyman services at affordable rates and seek to provide you, our customers, with quality and value! We chose the domain name 499Handyman.com because $499.00 is the most we charge for any job. Our handymen are skilled in everything from appliance repairs to installation of zip lines! If there is a project or some work you would like to have done around your house or place of business, please call us at 951-795-9797. We guarantee our work and offer warranties where applicable. We look forward to earning your business!



ALUMINUM SUPPLY CO INC
14359 MEYERS RD
5.00(
1
)
ALUMINUM SUPPLY CO INC
14359 MEYERS RD
5.00(
1
)
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Aluminum Supply Company, Inc. was founded by Robert Marshall in 1948 and quickly became known as the Metro Detroit area's premier supplier of architectural building products. ASCO also offers custom fabricating of a variety of metal products including stainless steel, aluminum, carbon steel, copper, brass, etc. Our fabrication equipment and years of experience enable us to build custom equipment and parts to fit the customers needs. Generally, we try to avoid trip charges unless absolutely necessary. Most pricing details can we worked through by phone, fax or e-mail. If installation is required, when necessary, we will use qualified sub-contractors to install with supervision by an ASCO manager.

Aluminum Supply Company, Inc. was founded by Robert Marshall in 1948 and quickly became known as the Metro Detroit area's premier supplier of architectural building products. ASCO also offers custom fabricating of a variety of metal products including stainless steel, aluminum, carbon steel, copper, brass, etc. Our fabrication equipment and years of experience enable us to build custom equipment and parts to fit the customers needs. Generally, we try to avoid trip charges unless absolutely necessary. Most pricing details can we worked through by phone, fax or e-mail. If installation is required, when necessary, we will use qualified sub-contractors to install with supervision by an ASCO manager.


Brown Auto
1226 W Sandusky St
5.00(
2
)
Brown Auto
1226 W Sandusky St
5.00(
2
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Owner is an ASE Master Certified Technician. We are a family owned business currently with 2 employees. We have 4 bays with vehicle lifts to accommodate most vehicles. We offer CarCare Credit with approval and we accept all major credit cards.

Owner is an ASE Master Certified Technician. We are a family owned business currently with 2 employees. We have 4 bays with vehicle lifts to accommodate most vehicles. We offer CarCare Credit with approval and we accept all major credit cards.


Autobahn Garage LLC
415 N Main St
3.00(
4
)
Autobahn Garage LLC
415 N Main St
3.00(
4
)
20 years of experience

Specializing in European Automotive repair. Tires, Transportation, and Vehicle Inspections

"I had my 2009 Audi A6 taken to them at the end of January, 2019. The engine needed to be rebuilt. A tech (Michael) with Autobahn had agreed to complete the job for $6,802. He needed an initial deposit which I paid on February 14, 2019. Ultimately I paid the following 2/14 $3100 3/14 $1200 3/22 $1000 3/26 $1000 4/8 $500 4/9 $700 Total: $7,500 I finally received a call from Michael on 4/1 stating that the engine was beyond repair and needed replacing. He assured me that the shop could locate a used engine, he would update the timing components, and that the cost would be comparable. He stated while I would spend more on parts it would save drastically on labor and the quote would not change. The next day I received a quote for nearly $10,000. I quickly voiced my concern and stated that I could not budget or justify spending $10K on the vehicle and that if that were the case I needed the shop to stop all activities, return funds, and return the vehicle. They prepared a new quote which was $8728 which again I rejected. They then prepared a final one of $7745.09 which I agreed to. Weeks later, it was still not done. In May they apologized that the job was still not completed and wrote off the last $245.09 and said it would be done soon. June 7, 2019 I was informed they could not find an engine unless they ordered directly from Audi and that I could have the vehicle, the bad engine, and that they would be keeping 1/2 of the funds. He told me that he understood that 'I was emotional,' to which I informed him that this was not about emotion but was a business matter. After urging him to reconsider my offer he refused again and said he would keep half of the funds. I cannot stress caution enough when dealing with this business. There is a lack of ethics and professionalism strongly evident. Find another shop."

Thomas F on June 2019

Specializing in European Automotive repair. Tires, Transportation, and Vehicle Inspections

"I had my 2009 Audi A6 taken to them at the end of January, 2019. The engine needed to be rebuilt. A tech (Michael) with Autobahn had agreed to complete the job for $6,802. He needed an initial deposit which I paid on February 14, 2019. Ultimately I paid the following 2/14 $3100 3/14 $1200 3/22 $1000 3/26 $1000 4/8 $500 4/9 $700 Total: $7,500 I finally received a call from Michael on 4/1 stating that the engine was beyond repair and needed replacing. He assured me that the shop could locate a used engine, he would update the timing components, and that the cost would be comparable. He stated while I would spend more on parts it would save drastically on labor and the quote would not change. The next day I received a quote for nearly $10,000. I quickly voiced my concern and stated that I could not budget or justify spending $10K on the vehicle and that if that were the case I needed the shop to stop all activities, return funds, and return the vehicle. They prepared a new quote which was $8728 which again I rejected. They then prepared a final one of $7745.09 which I agreed to. Weeks later, it was still not done. In May they apologized that the job was still not completed and wrote off the last $245.09 and said it would be done soon. June 7, 2019 I was informed they could not find an engine unless they ordered directly from Audi and that I could have the vehicle, the bad engine, and that they would be keeping 1/2 of the funds. He told me that he understood that 'I was emotional,' to which I informed him that this was not about emotion but was a business matter. After urging him to reconsider my offer he refused again and said he would keep half of the funds. I cannot stress caution enough when dealing with this business. There is a lack of ethics and professionalism strongly evident. Find another shop."

Thomas F on June 2019


Tig Artistics, LLC
50 Hoelting Farm Ln
No reviews
Tig Artistics, LLC
50 Hoelting Farm Ln
No reviews
15 years of experience

Welding and Fabrication: Tig and Mig Welding. Structural, framing, fencing, concessions, canopy units, special orders. Aluminum alloy. Experienced in Stainless Steel as well.

Welding and Fabrication: Tig and Mig Welding. Structural, framing, fencing, concessions, canopy units, special orders. Aluminum alloy. Experienced in Stainless Steel as well.

Showing 1-10 of 12

Welding services FAQs

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

The average cost to hire a welder is about $300, with an average rate ranging from $65 to $125 per hour, depending on their experience and the project type and size. Aside from labor costs, some other charges you’ll need to pay include the cost of the welding material and the cost of the shielding gas that makes welding possible and safe. When you’re interviewing welders for your work, you can ask for an estimate based on your project specifics. In some simple cases, like welding gas lines or common welding projects, local welders may charge a flat hourly rate with add-ons if necessary.

There are a few things you can ask welders before you hire them to get an idea of their experience and ability levels:

  • Are you licensed and certified?

  • How long have you been in the welding business?

  • Do you commonly do the type of welding I need?

  • Do you offer any kind of warranty for your work?

  • Do you charge by the hour or by the project?

  • How long do you expect my welding project to take?

  • What steps do you take to minimize errors in your work?

You should not do your own welding unless you have the proper training and experience. Most home electrical systems can only handle MIG welding, which creates weaker bonds than TIG welding and won’t work on certain metals or metal thicknesses. Both welding forms usually require the use of shielding gas, which can be dangerous to store at home. Additionally, welding machines create temperatures of over 3,000 degrees, and the sparks can blind you if you don’t have the proper equipment. As such, it’s usually better to hire a professional welder for your welding projects.

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

The homeowners guide to home care is here
From average costs to expert advice, get all the answers you need to get your job done.
Father and son playing at home
Apr 24, 2025
Apr 24, 2025
Heating and cooling system on the fritz? Discover the factors that go into HVAC repair costs and how you can save money on this crucial home update.
Heat pump exterior backyard
Apr 22, 2025
Apr 22, 2025
A heat pump is an eco-friendly heating and cooling system that can save you money on utilities each month. Find out the cost of a heat pump with this guide.
woman, man, and child in cozy blankets huddled next to furnace in low light and smiling
Apr 24, 2025
Apr 24, 2025
When it’s time to replace the furnace, review this guide for new furnace costs based on type, size, and efficiency, plus furnace installation costs.
A woman covered in a blanket reading a book
Apr 23, 2025
Apr 23, 2025
Whether you’ve lost heat or your furnace is making strange sounds, stay calm. Use this guide to determine the source of the problem and your next steps.
Bedroom interior with big bed and a sunny window
Apr 25, 2025
Apr 25, 2025
If you’re asking, “Why is my upstairs so hot?” we’re here to help. Read on and learn why it isn’t just poor air circulation causing a toasty top floor.
A woman covered in a blanket drinking some coffee
Apr 22, 2025
Apr 22, 2025
Why are some rooms colder than others? If your living room is toasty but the bedroom is freezing, here are a few reasons why and how to fix it.
Share project details to get started.