Get matched with top furniture reupholstery pros in Gilbert, WV
There are 0 highly-rated local furniture reupholstery pros.
Furniture reupholstery pros in Gilbert
Welcome to my profile! I specialize in the design, fabrication and installation of IKEA kitchen cabinetry, giving you a semi custom kitchen for much less! IKEA kitchens are my specialty, and has been for the last two decades, across northern Ohio, Pennsylvania, Kentucky and West Virginia and New Jersey too. It's all I do. IKEA Kitchens are a great value, and you'll keep more money in your pocket than you would with other brands. The quality, fit and finish are very good- I've visited kitchens I've installed 20 years ago and they're still in good condition (my clients know they can reach me anytime after their install should issues arise!). IKEA uses only Blum hardware for door hinges and drawer glides- the best of the best. But IKEA kitchens demand a high degree of precision and has to be installed with this in mind, especially when incorporating wall ovens, micro drawers or other built-in appliances such as Fisher-Paykel, Miehle, etc. Give me a call or send an email about your project! No charge for estimates. Thank you, Erik Gustav Tel:614.483.7110 ikeatech@gmail.com www.ikeatech.com
"Erik was hired to install IKEA cabinets in our home for a full kitchen renovation. I felt confident in assembling the cabinets and finishing them (doors, hardware, drawers, toe kicks, etc) but we wanted a professional to make sure the cabinets were hung level, plumb, and square. From our first conversation it was obvious that Erik is an expert in all things IKEA. He provided some guidance and changes to our design to make some subtle improvements that would not have been obvious to us. He also immediately identified a critical flaw in our design that would have greatly impacted the final outcome but luckily we had enough time to get the proper replaced item. Communication with Erik was decent but be prepared for patience with emails and texts. Phone calls seemed to be most effective. Also be prepared to be patient for his schedule. Despite our efforts to plan ahead and get on “his radar” back in July, it still took several rounds of calls and discussions to finally get a week nailed down and the arrival day wasn’t determined until the week-of. You will need to be flexible. The installation was very fast - he had all of the work completed in one day. He is also very precise and detailed. He took time to show me how cabinets were anchored to the wall, that cabinets were level and prepped for the countertop template. He also cleaned up nicely, was courteous in our home and has a professional demeanor. The installation wasn’t without issue though. He accidentally stepped on a weak piece of our corner cabinet and broke it. His solution was to “sister” a piece below it. I was told it wouldn’t affect the countertops as this had no load bearing properties and it won’t be visible once countertops are installed. I believe that he is correct, and accidents happen, but it was disappointing as mishaps was something I wanted to avoid and large reason why we elected to hire someone rather than do the installation ourselves. No adjustment was made to the agreed upon price to account for the broken cabinet which I felt would have been the appropriate thing to do even it was a minor reduction. Overall, I would hire Erik again and be better prepared to be patient and clearly a communicate my expectations. He is precise, detailed, and very knowledgeable on IKEA systems. His involvement resulted in a nice overall outcome."
Aaron K on October 2021
Welcome to my profile! I specialize in the design, fabrication and installation of IKEA kitchen cabinetry, giving you a semi custom kitchen for much less! IKEA kitchens are my specialty, and has been for the last two decades, across northern Ohio, Pennsylvania, Kentucky and West Virginia and New Jersey too. It's all I do. IKEA Kitchens are a great value, and you'll keep more money in your pocket than you would with other brands. The quality, fit and finish are very good- I've visited kitchens I've installed 20 years ago and they're still in good condition (my clients know they can reach me anytime after their install should issues arise!). IKEA uses only Blum hardware for door hinges and drawer glides- the best of the best. But IKEA kitchens demand a high degree of precision and has to be installed with this in mind, especially when incorporating wall ovens, micro drawers or other built-in appliances such as Fisher-Paykel, Miehle, etc. Give me a call or send an email about your project! No charge for estimates. Thank you, Erik Gustav Tel:614.483.7110 ikeatech@gmail.com www.ikeatech.com
"Erik was hired to install IKEA cabinets in our home for a full kitchen renovation. I felt confident in assembling the cabinets and finishing them (doors, hardware, drawers, toe kicks, etc) but we wanted a professional to make sure the cabinets were hung level, plumb, and square. From our first conversation it was obvious that Erik is an expert in all things IKEA. He provided some guidance and changes to our design to make some subtle improvements that would not have been obvious to us. He also immediately identified a critical flaw in our design that would have greatly impacted the final outcome but luckily we had enough time to get the proper replaced item. Communication with Erik was decent but be prepared for patience with emails and texts. Phone calls seemed to be most effective. Also be prepared to be patient for his schedule. Despite our efforts to plan ahead and get on “his radar” back in July, it still took several rounds of calls and discussions to finally get a week nailed down and the arrival day wasn’t determined until the week-of. You will need to be flexible. The installation was very fast - he had all of the work completed in one day. He is also very precise and detailed. He took time to show me how cabinets were anchored to the wall, that cabinets were level and prepped for the countertop template. He also cleaned up nicely, was courteous in our home and has a professional demeanor. The installation wasn’t without issue though. He accidentally stepped on a weak piece of our corner cabinet and broke it. His solution was to “sister” a piece below it. I was told it wouldn’t affect the countertops as this had no load bearing properties and it won’t be visible once countertops are installed. I believe that he is correct, and accidents happen, but it was disappointing as mishaps was something I wanted to avoid and large reason why we elected to hire someone rather than do the installation ourselves. No adjustment was made to the agreed upon price to account for the broken cabinet which I felt would have been the appropriate thing to do even it was a minor reduction. Overall, I would hire Erik again and be better prepared to be patient and clearly a communicate my expectations. He is precise, detailed, and very knowledgeable on IKEA systems. His involvement resulted in a nice overall outcome."
Aaron K on October 2021
I am a cabinet maker located in Harpers Ferry, West Virginia. I specialize in the restoration of original finishes as well as the construction of new furniture. I offer complete restoration services including refinishing, upholstery, caning, and all manner of furniture repair. for a complete list of my services and a gallery of my work please visit www.johnmarkpower.com
I am a cabinet maker located in Harpers Ferry, West Virginia. I specialize in the restoration of original finishes as well as the construction of new furniture. I offer complete restoration services including refinishing, upholstery, caning, and all manner of furniture repair. for a complete list of my services and a gallery of my work please visit www.johnmarkpower.com
Cost is determined by the job. Additional email - info@autodetailingbyme.com.
Cost is determined by the job. Additional email - info@autodetailingbyme.com.
We are a fourth generation family business that specializes in the sale and restoration of vintage pianos. We sell and restore pianos for clients all across the United States. We have worked with clients such as Stanford University, Roanoke Civic Center, and the City of Sacramento. We have also worked with celebrities such as Justin Rose & Stephen Colbert. Visit our website for videos, interactive diagrams, and photos of our restoration work, pianos, and informative information.
We are a fourth generation family business that specializes in the sale and restoration of vintage pianos. We sell and restore pianos for clients all across the United States. We have worked with clients such as Stanford University, Roanoke Civic Center, and the City of Sacramento. We have also worked with celebrities such as Justin Rose & Stephen Colbert. Visit our website for videos, interactive diagrams, and photos of our restoration work, pianos, and informative information.
SHOWROOM LOCATIONS; *ERIE, PA 5044 Peach Street, Mon-Fri 9AM-5PM, Sat (By Appointment Only); *MCMURRAY, PA 3150 Washington Road, Mon-Fri 9AM-5PM, Sat 10AM-2PM; *MONROEVILLE, PA 2644 Mosside Boulevard, Route 48 *STATE COLLEGE, PA 1341 South Atherton Street *WEXFORD, PA 11279 Perry Highway *MORGANTOWN, WV 918 Chestnut Ridge Road
"We were extremely happy with the service, installation and quality provided by Pella of McMurray. We dealt with Rob Culbertson. Rob was superb to deal with in many aspects. I highly recommend selecting Rob to handle your needs. The installers were professional, respectful and diligent. They worked hard under cold conditions. They were cognizant of their cleanliness too and swept up frequently. The fiberglass windows and doors look great and I examined them thoroughly. My neighbors have been complimentary too. Try Rob Culbertson and Pella of McMurray for your needs."
Chris W on March 2019
SHOWROOM LOCATIONS; *ERIE, PA 5044 Peach Street, Mon-Fri 9AM-5PM, Sat (By Appointment Only); *MCMURRAY, PA 3150 Washington Road, Mon-Fri 9AM-5PM, Sat 10AM-2PM; *MONROEVILLE, PA 2644 Mosside Boulevard, Route 48 *STATE COLLEGE, PA 1341 South Atherton Street *WEXFORD, PA 11279 Perry Highway *MORGANTOWN, WV 918 Chestnut Ridge Road
"We were extremely happy with the service, installation and quality provided by Pella of McMurray. We dealt with Rob Culbertson. Rob was superb to deal with in many aspects. I highly recommend selecting Rob to handle your needs. The installers were professional, respectful and diligent. They worked hard under cold conditions. They were cognizant of their cleanliness too and swept up frequently. The fiberglass windows and doors look great and I examined them thoroughly. My neighbors have been complimentary too. Try Rob Culbertson and Pella of McMurray for your needs."
Chris W on March 2019
Our company was founded by David Berger over thirty years ago and David has been selling table pads direct to the public for over forty years. We know our table pads and we know how to design the perfect fit the very first time.
"price is better other places magnets do not work keeping panels connected"
Stephen F on August 2020
Our company was founded by David Berger over thirty years ago and David has been selling table pads direct to the public for over forty years. We know our table pads and we know how to design the perfect fit the very first time.
"price is better other places magnets do not work keeping panels connected"
Stephen F on August 2020
Furniture reupholstery services FAQs
The cost to refinish wood furniture ranges widely, depending on the size and type of furniture. Here’s what you can expect to pay to refinish the following wood furniture items:
Table: $150–$700
Dining chair: $100–$400
Rocking chair: $200–$500
Bar stool: $100–$250
China cabinet or armoire: $500–$3,500
Dining set: $1,000–$3,000
Coffee table: $150–$800
Dresser: $300–$2,000
Bed: $350–$2,000
Pool table: $300–$600
Kitchen cabinets: $1,800–$5,000
As with any project, weighing the pros and cons of upholstery can help determine if that is the right choice for you. The ultimate question is whether it’s worth reupholstering instead of buying new furniture. Here are a few of the benefits and disadvantages of reupholstering a piece of furniture.
Pros:
Preserving a family heirloom
Maintaining high-quality furniture in good condition
Reinventing an old piece of furniture
Keeping a piece of furniture from going to a landfill
Cons:
Spending (possibly) more than to buy a new piece of furniture
Finding out the frame is beyond repair
Waiting for the reupholstery work to be done
It can be cheaper to reupholster a chair or other piece of furniture than to buy a new one, depending on how much it costs to replace. If the chair or couch originally cost less than $300, then reupholstery may not be the cheapest option. However, if the chair is expensive, vintage, or discontinued, reupholstery can be the more affordable option. This is especially true if the piece of furniture is out-of-production or holds sentimental value.
On average, the cost to reupholster furniture is about $720 per piece. However the price range to upholster a piece of furniture varies widely from about $380 to $1,150 or more, depending on the material type and availability, repairs needed, and the complexity of the project. Fabric costs typically range from $50 to $70 per yard while the cost of labor runs from $40 to $100 per hour.
The cost to refinish a table is about $250, depending on the size, type of finish, and amount of detail involved in the table and the new finish. The lowest price to refinish a table is about $80, and the highest is about $700. Additional tasks like dipping, stripping, staining, and painting will add to the total project cost. Here are average costs to refinish a table by type:
Side or end table: $80–$150
Coffee table: $150–$250
Dining room table: $400–$700
Get our Angi-powered app
