Get matched with top mold testing and remediation specialists in Albion, WA
There are 1 highly-rated local mold testing and remediation specialists.
Mold testing and remediation specialists in Albion
Affordable Environmental Inc is a registered contractor with the State of Washington. Project Design & Consulting AHERA Inspector, Asbestos Building Inspector, Asbestos Survey, Mold Management, Clandestine Drug Lab Decontamination, Hazardous Waste Operations & Emergency Response. Affordable Environmental Inc is a certified, dependable, professional contractor specializing in Asbestos, Lead, and Mold abatement, Demolition, Bio-Hazard clean up, Suicides, Homicides, and Clandestine Drug Lab Decontamination (Methamphetamine, etc). All work is performed by certified technicians and is in compliance with all EPA, OSHA, and state and local regulations.
"They did a good job! Professional and easy to work with. Looks great."
Kyle M on December 2023
Affordable Environmental Inc is a registered contractor with the State of Washington. Project Design & Consulting AHERA Inspector, Asbestos Building Inspector, Asbestos Survey, Mold Management, Clandestine Drug Lab Decontamination, Hazardous Waste Operations & Emergency Response. Affordable Environmental Inc is a certified, dependable, professional contractor specializing in Asbestos, Lead, and Mold abatement, Demolition, Bio-Hazard clean up, Suicides, Homicides, and Clandestine Drug Lab Decontamination (Methamphetamine, etc). All work is performed by certified technicians and is in compliance with all EPA, OSHA, and state and local regulations.
"They did a good job! Professional and easy to work with. Looks great."
Kyle M on December 2023
We are a residential and commercial environmental consulting and remediation company. Serving the greater Portland, OR, area for over 20 years, we have the experience and knowledge to handle just about anything. We offer a variety of services from mold assessment and remediation to radon testing and mitigation and tank services. We provide project oversight and technical review for projects big and small. This includes site analysis, mold assessment, and the remediation of toxins. We also offer a full range of heating oil tank services, from checking underground leaks to installing above ground storage tanks (ASTs). Our residential and commercial services include: • Environmental consulting and remediation • Environmental site assessment • Groundwater remediation • Habitat restoration • Mold testing and removal • Asbestos, radon and lead testing and inspection • Dry well sampling • Phase I & II environmental site assessments • Underground tank sampling • Vapor mitigation systems Environmental risk is an important and complex issue. Whether your concern is toxic mold or radon testing, Alpha Environmental Services can develop an environmental or engineering due-diligence solution that fits your individual needs. We are fully licensed and committed to your environmental needs. Call today for a free estimate and to schedule an appointment.
"All of the jobs went well, they are very communicative and responsive. The home owner was pleased with the work done."
Kim A on February 2021
We are a residential and commercial environmental consulting and remediation company. Serving the greater Portland, OR, area for over 20 years, we have the experience and knowledge to handle just about anything. We offer a variety of services from mold assessment and remediation to radon testing and mitigation and tank services. We provide project oversight and technical review for projects big and small. This includes site analysis, mold assessment, and the remediation of toxins. We also offer a full range of heating oil tank services, from checking underground leaks to installing above ground storage tanks (ASTs). Our residential and commercial services include: • Environmental consulting and remediation • Environmental site assessment • Groundwater remediation • Habitat restoration • Mold testing and removal • Asbestos, radon and lead testing and inspection • Dry well sampling • Phase I & II environmental site assessments • Underground tank sampling • Vapor mitigation systems Environmental risk is an important and complex issue. Whether your concern is toxic mold or radon testing, Alpha Environmental Services can develop an environmental or engineering due-diligence solution that fits your individual needs. We are fully licensed and committed to your environmental needs. Call today for a free estimate and to schedule an appointment.
"All of the jobs went well, they are very communicative and responsive. The home owner was pleased with the work done."
Kim A on February 2021
At Mold Test Company NOCA, we take great pride in the experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
At Mold Test Company NOCA, we take great pride in the experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
At Mold Test Company WA, we take great pride in our experience, expertise, quality and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.
"communicative, very professional"
Kim T on April 2025
At Mold Test Company WA, we take great pride in our experience, expertise, quality and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.
"communicative, very professional"
Kim T on April 2025
Lifespan Systems, Inc., is the premier option for toxic material testing and solutions. Art Wenholz has over 40 years of experience in business. Lifespan Systems, Inc., has consistently provided the highest quality of service and takes great pride in doing so. Lifespan Systems, Inc., refuses to provide inconclusive service and will work diligently to make your property safe.
"Art did a great job! He traveled here to Polson, Montana twice for me. The first time was for mold removal & the second time he got my dehumidifier set up & running in my crawlspace."
Barbie H on November 2024
Lifespan Systems, Inc., is the premier option for toxic material testing and solutions. Art Wenholz has over 40 years of experience in business. Lifespan Systems, Inc., has consistently provided the highest quality of service and takes great pride in doing so. Lifespan Systems, Inc., refuses to provide inconclusive service and will work diligently to make your property safe.
"Art did a great job! He traveled here to Polson, Montana twice for me. The first time was for mold removal & the second time he got my dehumidifier set up & running in my crawlspace."
Barbie H on November 2024
My Pure Environment specializes in using a patented dry fog process to kill mold without any to very little demolition. We pride ourselves on being the best at mold remediation both in efficacy, timeframe, and value. We?re so confident in this that we offer a warranty that is unparalleled in our industry! Mold is all we do, this is our passion and sole focus, no one knows mold and mold remediation like we do. It is our goal to bring every home and business back to a safe and healthy environment while giving our customers the peace of mind and confidence that only comes from having the best work done by the best people. If you have mold concerns and need testing, have a mold problem you need fixed and want to prevent future mold development, then we are your only solution! We look forward to serving you and yours with integrity and great care.
"Very poor customer service. No follow through after I had the house tested. I had to call after two weeks of waiting for the test results when I was told it would be 2-3 days. After the results we discussed having my attic inspected for a possible leak which I wanted before the testing was done. I was told I would be referred to a roof company they would recommend then after any repairs were done, if needed, I wanted the house treated. I have never heard back from the company. It has been a month now."
Jean F on November 2023
My Pure Environment specializes in using a patented dry fog process to kill mold without any to very little demolition. We pride ourselves on being the best at mold remediation both in efficacy, timeframe, and value. We?re so confident in this that we offer a warranty that is unparalleled in our industry! Mold is all we do, this is our passion and sole focus, no one knows mold and mold remediation like we do. It is our goal to bring every home and business back to a safe and healthy environment while giving our customers the peace of mind and confidence that only comes from having the best work done by the best people. If you have mold concerns and need testing, have a mold problem you need fixed and want to prevent future mold development, then we are your only solution! We look forward to serving you and yours with integrity and great care.
"Very poor customer service. No follow through after I had the house tested. I had to call after two weeks of waiting for the test results when I was told it would be 2-3 days. After the results we discussed having my attic inspected for a possible leak which I wanted before the testing was done. I was told I would be referred to a roof company they would recommend then after any repairs were done, if needed, I wanted the house treated. I have never heard back from the company. It has been a month now."
Jean F on November 2023
As an inspector with more than 4500 completed inspections, I run my business with one goal in mind - to perform the most thorough inspection I can so that you don't face unwelcome surprises. In addition to my home inspection experience, I am a former Chairman of the State Home Inspector Advisory Board which developed the Standards of Practice for Washington State. I am also a former member of the Washington State Building Code Council and wrote a short book for home sellers titled Surviving the Home Inspection. The inspection will include all the elements of the Washington State SoP. From top to bottom, I will inspect your home. If safe, I will walk the roof, crawl the crawlspace, and remove covers for electrical panels. Reports are completed on the same day and include digital pictures and video. Your comfort and safety in your home is my utmost priority.
"It seemed to go OK - he was on time and friendly. But, after the inspection we discovered that a number of issues had been overlooked or poorly evaluated. Through a series of unexpected circumstances, we've moved 4 times in the past 6 years - yuck! That, combined with the fact that we've owned about 10 houses over the years (including 2 ranches) has given us a lot of exposure to inspectors. This inspector just missed too many things & didn't pay attention to details. For example, the shop had an attic that was accessed by a drop down ladder. The inspector had noted that the roof was in poor shape, but he failed to climb the ladder to see if it had been leaking. He stated that "access to ladder was obstructed and he could not access the attic." But the realtor and I both had no trouble in dropping the ladder and crawling up for a look. There was no blockage AT ALL! Unfortunately, we didn't have a flashlight, so we couldn't see much. In my opinion, he just got lazy or in a hurry. His failure ultimately will cost us over $10,000 - the shop roof was leaking and now needs a full replacement. Had he simply taken the time to check this out - especially since he'd already noted the roof was in poor condition (which should have been a red-flag causing him to investigate further) we could have required to seller to address the issue - but he just blew it off and by the time I could look again (we lived three hours from home in question), and take a flashlight, the inspection period had passed. Access was unhampered, he just chose not to do his job and justified it by saying access was blocked. He failed in a number of other ways too (like a failure to conduct or even suggest radon testing). Very disappointed. If you want a quick, "once over lightly" inspection, he's your guy. If you need a detailed assessment of a property you're planning to buy, I would not recommend him - period!"
Chance G on August 2019
As an inspector with more than 4500 completed inspections, I run my business with one goal in mind - to perform the most thorough inspection I can so that you don't face unwelcome surprises. In addition to my home inspection experience, I am a former Chairman of the State Home Inspector Advisory Board which developed the Standards of Practice for Washington State. I am also a former member of the Washington State Building Code Council and wrote a short book for home sellers titled Surviving the Home Inspection. The inspection will include all the elements of the Washington State SoP. From top to bottom, I will inspect your home. If safe, I will walk the roof, crawl the crawlspace, and remove covers for electrical panels. Reports are completed on the same day and include digital pictures and video. Your comfort and safety in your home is my utmost priority.
"It seemed to go OK - he was on time and friendly. But, after the inspection we discovered that a number of issues had been overlooked or poorly evaluated. Through a series of unexpected circumstances, we've moved 4 times in the past 6 years - yuck! That, combined with the fact that we've owned about 10 houses over the years (including 2 ranches) has given us a lot of exposure to inspectors. This inspector just missed too many things & didn't pay attention to details. For example, the shop had an attic that was accessed by a drop down ladder. The inspector had noted that the roof was in poor shape, but he failed to climb the ladder to see if it had been leaking. He stated that "access to ladder was obstructed and he could not access the attic." But the realtor and I both had no trouble in dropping the ladder and crawling up for a look. There was no blockage AT ALL! Unfortunately, we didn't have a flashlight, so we couldn't see much. In my opinion, he just got lazy or in a hurry. His failure ultimately will cost us over $10,000 - the shop roof was leaking and now needs a full replacement. Had he simply taken the time to check this out - especially since he'd already noted the roof was in poor condition (which should have been a red-flag causing him to investigate further) we could have required to seller to address the issue - but he just blew it off and by the time I could look again (we lived three hours from home in question), and take a flashlight, the inspection period had passed. Access was unhampered, he just chose not to do his job and justified it by saying access was blocked. He failed in a number of other ways too (like a failure to conduct or even suggest radon testing). Very disappointed. If you want a quick, "once over lightly" inspection, he's your guy. If you need a detailed assessment of a property you're planning to buy, I would not recommend him - period!"
Chance G on August 2019
The founder and principal craftsman of Ornamental Plaster Expert, Hamza Alabidi, is a third generation master craftsman (born and raised in Iraq) with over 25 years of ornamental plaster design and restoration experience. We are Licensed, Bonded and Insured.
"Wow! Professional beyond my expectations. Excellent craftsmanship. I was really concerned after my house rewire left over a dozen large holes in the plaster throughout my home. I contacted this reference from Angie’s List. He came out the next day and gave me a fair and honest estimate. He was true t9 his word. Was on time and efficient. I will definitely hire again for future restoration work that needs to be done for my 100+ year old Home in Tacoma."
Jeanette S on September 2018
The founder and principal craftsman of Ornamental Plaster Expert, Hamza Alabidi, is a third generation master craftsman (born and raised in Iraq) with over 25 years of ornamental plaster design and restoration experience. We are Licensed, Bonded and Insured.
"Wow! Professional beyond my expectations. Excellent craftsmanship. I was really concerned after my house rewire left over a dozen large holes in the plaster throughout my home. I contacted this reference from Angie’s List. He came out the next day and gave me a fair and honest estimate. He was true t9 his word. Was on time and efficient. I will definitely hire again for future restoration work that needs to be done for my 100+ year old Home in Tacoma."
Jeanette S on September 2018
tony santini, Larry santini. jj santini. Carlos santini four brothers with over 25 plus years of expertise. Our goal then and now is to provide quality on time projects.We let our quality work and commitment to customer satisfaction be our slogan.
tony santini, Larry santini. jj santini. Carlos santini four brothers with over 25 plus years of expertise. Our goal then and now is to provide quality on time projects.We let our quality work and commitment to customer satisfaction be our slogan.
Additional DBA - Bio Management Northwest Inc. See website for additional services. DBAs Clutter Control NW, Healthy Crawlspaces NW, & Water & Fire NW.
Additional DBA - Bio Management Northwest Inc. See website for additional services. DBAs Clutter Control NW, Healthy Crawlspaces NW, & Water & Fire NW.
Mold testing and remediation services FAQs
Some states require mold removal specialists to be licensed, while others require licensed mold testing companies to create remediation protocols that any contractor can carry out. You can use our state licensing tool to find requirements in your area. In either case, it’s imperative that you hire an experienced professional for mold removal to ensure the safety of your home and your family.
It’s possible to scrub mold off of visible surfaces yourself, but it’s not usually a good idea. Mold is not only a potential health risk, but it’s also difficult to treat in its entirety, especially because it can grow behind walls and in other hidden areas a DIYer might miss. Since mold is a serious and often pervasive issue, you should hire a professional that will remove all of the mold—including any that might be hidden—run industrial air scrubbers to remove airborne particles, and complete mold testing to ensure the underlying problem is solved.
The most effective way to remove mold includes testing affected surfaces and the air for spores, creating a protocol for removal, carrying out the steps within the protocol, running air scrubbers for the recommended amount of time, and then completing a post-remediation round of testing to confirm the issue is solved. Since this work is very involved and there are health risks if done incorrectly, you should always hire an experienced professional to handle mold removal.
The average cost for mold remediation is around $2,200, and most projects fall somewhere between $1,100 and $3,300. Your total will depend on many factors, including the surface area that is affected by mold, the extent of the issue, how much building material your professional needs to replace, whether or not testing is necessary for safety reasons, and existing indoor air quality.
Mold removal will take between one and five days in most cases, but severe mold issues can take several weeks to correct. Your timeline will depend on how much mold there is in your home, where the mold is located, and how much testing and aftercare is required. If you have mold behind your walls or you have an excessive amount of mold that requires removal and running air scrubbers for several days, you could be looking at over a week for the process to be completed.
Get our Angi-powered app
