Get matched with top metal fabricators and restorers in Sweet Home, AR
There are 0 highly-rated local metal fabricators and restorers.
Metal fabricators and restorers in Sweet Home
Landscaping business locally owned and operated we feel invested in our clients and constantly strive for customer satisfaction. Call or message us to schedule an estimate today!
"Dimas and employees were courteous , hard working and willing to do whatever I asked. They came quickly and came back to do some extra work I asked them to do. The fence they built looked great and I would definitely use them again!"
Virginia B on April 2025
Landscaping business locally owned and operated we feel invested in our clients and constantly strive for customer satisfaction. Call or message us to schedule an estimate today!
"Dimas and employees were courteous , hard working and willing to do whatever I asked. They came quickly and came back to do some extra work I asked them to do. The fence they built looked great and I would definitely use them again!"
Virginia B on April 2025
Our mission is to be a contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!
"He is awesome. He worked consistently an exceeded our expectations. He and his crew worked well together and worked tirelessly until the fence was completed. They cleaned up after and the fence looks great. He has amazing work ethics."
Jan M on September 2024
Our mission is to be a contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!
"He is awesome. He worked consistently an exceeded our expectations. He and his crew worked well together and worked tirelessly until the fence was completed. They cleaned up after and the fence looks great. He has amazing work ethics."
Jan M on September 2024
The Blackwood Co does any metal job you need! From steel to aluminum, boat repairs, fence work, and custom fabrication jobs. If you can think it, we can weld it!
The Blackwood Co does any metal job you need! From steel to aluminum, boat repairs, fence work, and custom fabrication jobs. If you can think it, we can weld it!
Encore Steel Buildings specializes in customizable prefabricated steel building kits for commercial, agricultural, industrial, and residential use. We offer complete, cost-effective metal building kits to fit your budget. These are pre-engineered metal buildings of the highest quality, backed by industry-leading warranties. Because we have over 30 years of experience and we only use 100% American steel, that makes us your number one choice for components and pre-engineered steel buildings.
"Save yourself grief and avoid this company. I am an owner-builder (36x60 shop) and was connected with Encore via the broker I used to purchase the kit (The Steel Builder, Chico California: avoid this company too). Below are a few of the issues. Promised repeatedly it would be a five- to six-week delivery time. Actual was more than two months. First delivery was incomplete (no siding or trim). I was not provided a master manifest and delivery schedule, and therefore was not aware of what was missing. Contacted Encore after about six days to enquire on siding. Many components (about 5%) were mis-marked (didn’t match plans) and lengths of several did not match their labels. A few of the purlin weld tabs on the rigid frame were welded to the wrong side of the mark; about 3/8 inch off. Several items, such as gable end angle to support siding, were not addressed in plans: we fabricated substitute supports from extra base angle. One of the column base plates was not square with the column (frame line 2). This affected siding and ridge alignment, roof sheeting, eve overhang, etc. Only way to correct this is with shims, which the county inspector said would need to be engineered into the plans. Siding took an additional two weeks to receive, which required me to extend the rental of two scissor lifts ($800 cost). Ridge caps did not arrive until the structure was nearly complete; had to buy $200 worth of tarps to protect exposed insulation from rain. Trim and soffit components. Received partial delivery with unmarked components (they are supposed to be labeled to match the plans). The driver handed me a stack of sticky labels and it took ½ day to figure out where everything went. The building is now done, lift equipment is now gone, and I’ve still not received soffits and eve trim. Comms: Encore representative Ric Solis did what he could to patch things up, but had been thrown into the equation late in the transaction (the original guy left the company). Lastly, I was looking for a US-manufactured building and was originally told this kit was would come from Atwater, California. Ultimately, the rigid frame and components came from Texas but were manufactured in Mexico. I should have asked the specific question, "Is this made in USA?""
Chris C on December 2020
Encore Steel Buildings specializes in customizable prefabricated steel building kits for commercial, agricultural, industrial, and residential use. We offer complete, cost-effective metal building kits to fit your budget. These are pre-engineered metal buildings of the highest quality, backed by industry-leading warranties. Because we have over 30 years of experience and we only use 100% American steel, that makes us your number one choice for components and pre-engineered steel buildings.
"Save yourself grief and avoid this company. I am an owner-builder (36x60 shop) and was connected with Encore via the broker I used to purchase the kit (The Steel Builder, Chico California: avoid this company too). Below are a few of the issues. Promised repeatedly it would be a five- to six-week delivery time. Actual was more than two months. First delivery was incomplete (no siding or trim). I was not provided a master manifest and delivery schedule, and therefore was not aware of what was missing. Contacted Encore after about six days to enquire on siding. Many components (about 5%) were mis-marked (didn’t match plans) and lengths of several did not match their labels. A few of the purlin weld tabs on the rigid frame were welded to the wrong side of the mark; about 3/8 inch off. Several items, such as gable end angle to support siding, were not addressed in plans: we fabricated substitute supports from extra base angle. One of the column base plates was not square with the column (frame line 2). This affected siding and ridge alignment, roof sheeting, eve overhang, etc. Only way to correct this is with shims, which the county inspector said would need to be engineered into the plans. Siding took an additional two weeks to receive, which required me to extend the rental of two scissor lifts ($800 cost). Ridge caps did not arrive until the structure was nearly complete; had to buy $200 worth of tarps to protect exposed insulation from rain. Trim and soffit components. Received partial delivery with unmarked components (they are supposed to be labeled to match the plans). The driver handed me a stack of sticky labels and it took ½ day to figure out where everything went. The building is now done, lift equipment is now gone, and I’ve still not received soffits and eve trim. Comms: Encore representative Ric Solis did what he could to patch things up, but had been thrown into the equation late in the transaction (the original guy left the company). Lastly, I was looking for a US-manufactured building and was originally told this kit was would come from Atwater, California. Ultimately, the rigid frame and components came from Texas but were manufactured in Mexico. I should have asked the specific question, "Is this made in USA?""
Chris C on December 2020
We are small local welding shop that provides quality certified welding services. Owned and operated by an Engineer who puts quality first.
We are small local welding shop that provides quality certified welding services. Owned and operated by an Engineer who puts quality first.
We are a new business that focuses primarily on handyman type work. This includes most home repairs other than electrical and plumming. Also we offer power washing of homes, driveways, and walkways. Along with these we will wash and restore wooden decks and fences. We do some custom metal work upon request, however this is not our current speciality. What sets us apart is our pricing model. You let us know what you need and we will do the work. Once complete you decide what to pay over our costs based on your own evaluation. People come before profit at Jacks Metals and More.
We are a new business that focuses primarily on handyman type work. This includes most home repairs other than electrical and plumming. Also we offer power washing of homes, driveways, and walkways. Along with these we will wash and restore wooden decks and fences. We do some custom metal work upon request, however this is not our current speciality. What sets us apart is our pricing model. You let us know what you need and we will do the work. Once complete you decide what to pay over our costs based on your own evaluation. People come before profit at Jacks Metals and More.
B & S Enterprise
B & S Enterprise
Small Excavation Contractor with a combined 35 plus years of experience in the construction industry. No job to small, we pride ourselves in honesty and integrity of our work.
Small Excavation Contractor with a combined 35 plus years of experience in the construction industry. No job to small, we pride ourselves in honesty and integrity of our work.
Security Steel Sales
Security Steel Sales
"Every Job Is Our Next Reference" *Free Estimates *Financing Available *Restoration Specialists *Licensed and Insured For Your Protection *"Ask About Our 10 Year Warranty" *Craig Cougill - President
"Every Job Is Our Next Reference" *Free Estimates *Financing Available *Restoration Specialists *Licensed and Insured For Your Protection *"Ask About Our 10 Year Warranty" *Craig Cougill - President
Metal fabrication and restoration services FAQs
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.
Get our Angi-powered app
