Condensation on Ductwork: Causes and Potential Solutions
Don’t let your ductwork sweat
Water buildup on your ductwork occurs when warm, outside air mixes with cooler air in your ductwork. If you notice a buildup of condensation on your ducts, our guide will help you identify what the cause could be. Plus, we’ll show you solutions on how to stop condensation on ductwork.
What Causes Condensation on Ductwork?
It isn’t uncommon to discover some moisture on your ductwork. However, if you notice air ducts sweating, you’ll want to address it. Here are some of the common causes:
Poor Duct Insulation
If your ducts have poor insulation, it allows warmer air to seep through. The effect is similar to removing a can of pop from the refrigerator. As it begins to warm up, you’ll notice sweat beads forming on the can. The same effect applies to your home’s ductwork. If you notice sweat build up in one room, you can reseal the ducts easily with duct mastic. However, if it’s a multi-room problem, it could indicate a design deficiency that requires professional assistance.
Duct Leaks
Duct leaks cause conditioned air inside the ducts to escape and mix with warmer, humid air outside. This temperature difference causes the moisture in the warm air to condense on the cooler surface of the ducts.
When condensation accumulates, it can lead to moisture buildup on and around the ducts. This is particularly problematic in unconditioned areas such as attics, basements, or crawl spaces. Condensation on ductwork in crawl spaces and similar areas is caused by temperature and humidity levels that can be significantly higher than the conditioned air inside the ducts. If left unchecked, this moisture can lead to problems such as mold growth, water damage, and reduced efficiency of the HVAC system.
If you're unsure if your air ducts have leaks, consider hiring a local ductwork professional. The cost to check for air duct leaks ranges between $100 and $750.
Excessive Humidity
When there are high levels of humidity in the air, your home’s air conditioner has to work harder to remove it.
Some culprits of high humidity presence include humidifiers, hot showers, and even cooking, though in these cases, they’re usually not prolonged problems. A bigger issue could be drafty windows and doors, welcoming warm air into your home, or a ventilation system that isn’t working properly.
Dirty Air Filters
Air filters have the task of removing particles and other irritants to make cleaner air that circulates throughout your home. That said, if you don’t replace your air filters at least every 90 days, it could result in particle buildup on the air filter. In turn, it hinders its ability to cycle through cleaner air, and it makes your home’s HVAC system work harder. This leads to higher energy bills and could result in moisture presence on your ductwork.
Blocked Air Ducts
You could be facing the issue of a blocked duct from several different sources. Damaged ductwork or pests are the most common causes of blocked ducts. If you have either of these issues, you’ll need to call in a pro to help out. In the meantime, make sure you don’t have any furniture obstructing air vents in your home, which could also contribute to the issue.
How to Stop Condensation on Air Ducts
Now that you know some of the causes of condensation, you can turn your attention to some simple fixes, such as:
Inspect Your Ducts for Air Leaks
One simple way to do this is with a DIY dry duct leakage test. Locate your duct joints (where two ducts meet). Then, run your hand around the joint when your home’s air conditioner or heater runs. If you feel air, it means you have a leak and need to repair it (or call a pro to do so) promptly.
Reduce the Humidity
You can achieve this by opening your window for a short period of time in the winter to remove warmer air. You can also use a whole-house dehumidifier, which will reduce condensation on ductwork because it works with your home’s HVAC system to remove excess moisture from the air. It also takes some of the work off the air conditioner, which can lower energy bills. A whole-house dehumidifier costs between $1,300 and $2,800.
Make Sure Vents Stay Open
Open air vents allow air to flow freely throughout the HVAC system to maintain your air pressure and temperature. Closed vents create a bottleneck that disrupts airflow, causing pressure to build up and force cooled air to escape through any small leaks.
Replace Air Filters as Directed
If you notice sweat build up on your ductwork, ask yourself this: When was the last time I replaced the air filter? Depending on the type of air filter you choose, you might need to replace it once every month or once every three months. This is a simple, cost-effective way to ensure your home’s HVAC system works efficiently, and it might help keep condensation on ductwork to a minimum.
Improve Ductwork Insulation
Proper insulation acts as a barrier that keeps the cool air in air conditioning systems from losing its temperature as it travels through the ductwork. A consistent temperature within the ducts reduces the risk of the outer surface cooling to the point where it can cause condensation. Quality insulation also keeps external heat and humidity from affecting the ducts for increased efficiency. Air duct insulation cost ranges between $1,000 and $2,700.
When to Replace Old Ductwork
If you have an older home or notice air leaks in multiple areas of your ductwork, it could indicate a problem with the design and that you might need to upgrade your system. Your local air duct installer can work with you to determine what is the most efficient ductwork for your home.
Costs to replace ductwork range from $1,400 to $9,000 on average, depending on the size of your home, the type of ductwork you need, and more. It seems like a sizable expense on the surface, but given your ductwork is responsible for deploying air throughout your home, an efficient system can improve your comfort and lower your energy bills. During installation, you can also learn creative ways to hide your ductwork to give your home a more welcoming feel.