Get matched with top chain link fence repair pros in Hemet, CA

"I had an appointment for fencing quote on July 1, 2021. Carlos gave them a call and I scheduled with him on the phone directly and he didn't showed up. I received a call 5 days later and asked if I'm still interested then I said no, thank you then he said okay then hanged up. I was only contacted by Carlos by the company I didn't spoke with other person or customer service or anything like that."

"5++ stars! My home's exterior was cracking due to a poor job prior and drainage issues. Tom and Adam and the team not only gave me peace of mind moving forward with drainage, put in gutters, and re-did the entire exterior of my home (stained wood and stucco), but made it beyond beautiful!! They were communicative, timely, so easy to work with, and the end product is gorgeous. I would recommend them to anyone who needs a construction project done and can't wait to use them again on my next project!!"

"Erika was great! Helpful and efficient with her estimate and super friendly. We used virtual technology and I had pdf quotes for different options from her team in under an hour. Estimates seem reasonable and compare favorably to other companiest so far. No charge for the estimates."

"I found Supreme Remodeling here on Angi. I interviewed several contractors and chose them mostly because of YOAV their representative I met with. He was the only one who offered design ideas at the initial meeting. I wanted to build an ADU. They handled everything from design to permits. As an added bonus their bid was the lowest by quite a bit.😁😁 I would 1000% recommend Supreme Remodeling and especially Yoav, he’s a real gem."

"I worked with David from So Cal Builders and Design on a bathroom and bedroom addition to my home. We had been through a few renovation projects before so expectations were low, but I can honestly say this is the BEST experience I have ever had with a contractor. If you need work done hire David and his team! David helped navigate the whole process for us from drawing up the plans, through the entire build, and final inspection. As with any renovation project some issues arose along the way, but David's attitude was always "it's okay, we will take care of it"! He was super transparent with everything going on, and was very responsive when I had questions. He also helped me with some design ideas that I absolutely LOVE! The end result is honestly better than I could have fully envisioned, and I truly believe it wouldn't have been possible without David and his team. Thank you for everything So Cal Builders and Design!"

"We started the process of building our detached ADU at the beginning of 2022. We hired an Architect, who drew up a plan to build a 1200 sq ft, 3 bedroom 2.5 bathroom house. After 14 months of waiting and addressing revisions required by the Los Angeles Department of Building and Safety we got our permit in “Ready to Issue” status. While waiting for city approval, we all started looking for a fair, reliable and honest contractor who would do good/solid construction. We started the process of interviewing contractors and getting bids for the job. After several meetings and several bids, we met Micky Kanian with “AGA Construction”. We found Micky on Yelp. One of his references took us thru an ADU that Micky and team built for his elderly mother-in-law to live in. This family could not say enough good things about Micky and team. They took us thru the property and explained their experience in great detail. We saw another beautiful AGA project, a 5k sq ft + project that was in progress and really knew that day that we’d found our contractor. We weren’t quite ready to pull the trigger for personal reasons, so we put the project on hold. Meanwhile, we continued to collect a couple of other bids that were already in progress. During this process, AGA kept in touch with us. They checked in every few weeks or so, without being pushy or intrusive. After a delay of about 9 months, we decided to move forward with AGA construction. No one is a tougher critic than me. I was dreading this project because of the amount of stress that I knew we’d be under. Both financially and mentally. We’ve all heard and/or lived thru the horror of a construction project gone wrong. I won’t bury the lead any further. We love our ADU!!!!! We started the project on Jan 31st of 2024. We were told that the project would take 6-8 months. We lost the first 6 weeks or so with the heavy rains from last year, but even with that delay, we were mostly done with the project by the middle of August. We ran into the “expected” unknowns and surprises – all dealt with fairly and quickly by Micky and team. I would like to call out Joachin who was amazing. We always felt like we were in the best of qualified hands during this entire process. All inspections were signed off, the last checks were written, and we now have a gorgeous new home behind the main house on that property. We were so happy with the project and trusted Micky and Joachin so much, that we immediately launched a second project of gutting and renovating a very large master bathroom for my In-Laws. That job started on September 23rd and was done the first or second week of November as promised. It would’ve been done sooner, but we had a little “client indecision” that cost us about a week or two. All in all, I would highly recommend Micky and his crew, and we plan to use them for as long as they are in business or until my family and I run out of projects."

"Very well. Worked closely with me To consider my needs."

"It went very well, thanks to Nathen and his workers. They cleaned up the trash everyday when they finished the work. The work was done in the time frame they gave me with no hold ups at any point. I already recommended to s friend of mine."

"This was one of the most awful, traumatic experiences working with any contractor I’ve ever had. Patrick was extremely difficult to work with and a terrible communicator. He hardly answered emails or when he would, he’d ignoring the content. When communicating verbally, it was in one ear and out the other. It took me a year and a half to get the gate installed. From April 2019 to May 22, 2020, I just had the gate posts there in my driveway, and no gate. When they finally brought over the gate and installed it, it was not made according to the agreed-upon specs, so they carted it off and re-did it. Even in the 2nd install, while now the gate is made according to the specs, there are still unresolved issues that I don’t even want to bother with fixing any more. In April 2019, after Patrick knew which of his gate styles I wanted, he came with his guys to install the posts in the cement and install the electrical wiring under the house, and we went over various positioning of the future gate. I needed the gate to open outwards but he said that wasn’t possible. A friend of mine said it would be, and made designs, which I both emailed him and hand-delivered in Nov 2019 when I went to his workshop in Tujunga, 30 min. from my house. I brought my friend to discuss it in person before they even started building the gate. The gate design I had wanted was based on a photo of a gate in his studio and one installed in Pasadena which I sometimes went to visit and take measurements from to provide him. I insisted on including a design of the gate with the contract. He provided me this design, which was missing the central thick post, which is one of the main features I liked about the actual gate- that it looked like two doors. Instead, this was one panel. I asked him to re-design it with the measurements but based on the photo of a gate he had done but he refused, saying he had to pay someone $100 to make the first drawing. So I did it myself using this photo he sent me as the basis, and I gave that to him with specs written on it. Also, because Patrick complained that there weren’t specifics on how the gate would open outwards, and just designs, I gave him those specs, too, which my friend carefully designed. In my Nov. 11, 2019 email to him, I tried to make it crystal clear: “Hi Patrick Ready to move forward again on the gate. Todd even made a 2-D model to make sure that my car will fit though and i’d have about 10” on each side of my sideview mirrors. I’m attaching his diagrams and measurements here in the PDF and I asked him to write down in text form what he wants to say about the 3rd page. 1. Weld a second 4” by 4” steel post to the existing one so that the gate can swing open to the backyard with its hinge pin centers located 5” away from the house’s wall (requires custom block or bracket to weld hinge pin bodies to post). 2. Weld the hinge pin bodies to the BACKSIDE of the gate on 1/4” steel reinforcement plates which are welded onto the gate’s 1.5” by 1.5” vertical posts. 3. Mount the Liftmaster LA400 on a custom-made bracket so it’s pivot center is 2” left and 8” back from the hinge pin center axis (left means towards the house wall and back means towards the backyard). The Liftmaster LA400 should be installed low and out of view behind the bottom panels on the gate. 4. Attach the actuator arm of the Liftmaster LA400 to the BACKSIDE of the gate 45” away from the gate’s hinge pin center axis (will require a 1/4” steel reinforcement plate welded across the gate’s 1” by 1.5” horizontal members at the attachment point).” On Nov. 12, he wrote back: “We can not work with this. It has no guidance at all . Plus I think we can do it without the second post. So I think we need to meet again. We have an other option for the gate which would allow us not to use the second post” It then took 9 more emails to figure out from him WHEN would be good to meet. Finally, on Dec. 5 , 2019 after 2 days of unanswered emails, I called. I thought he needed to come back on site to go over the design but he refused to come back because he claimed I made him stand in the sun for two hours and because of his illness it’s not good for him, to which I said I was not familiar with that illness or its dangers, to which he said “you’re a teacher, you should look it up.” At his initial measuring meeting in April 2019, he never at one point suggested going inside because of his illness. We met again on Dec. 6, but this time I went out to his studio. I handed him hard copies of the designs and dimensions of the gate, (apparently he didn’t have the specs anymore), which included details like the distance from the wall in both open and closed position, where the actuator should be installed, the length and height of the gate, the width of the pickets. I even provided a picture of a gate he had done in Pasadena that I took in situ, and pointed arrows to the elements that should be recreated and what elements (just the flowers) should go. It was essentially the same gate. We were very specific so that there wouldn’t be any mistakes. I wanted it in writing, as a written record for both of us. On Jan. 26, 2020 I got an email they were moving ahead with building the gate, but I then heard nothing back for a month, so on Feb.20, 2020 I asked for an update. I figured they were still constructing and he’d call when ready to install. On April 15, 2020 I called to find out what’s going on, but Patrick had broken his ribs and said he’d said someone to my place to take another set of measurements on my driveway of the post distance again and he gave me Kearney’s number to make arrangements. April 20, I called Kearny, but the phone number didn’t work. I had to call Patrick back to get the right number. April 25, Kearny came. Finally, on May 22, 2020, over a year of back and forth, they finally came with the actual gate and installed it. Except the gate dimensions were off. The pickets were too thick (3/4”) and therefore there were fewer pickets. I wanted the same thin (1/2”) pickets as the gate in Pasadena for it to look more delicate. Also, the central spire was way too high in this gate - not the same 86” height as the Pasadena gate or what was written in the spec I handed him. All of this was unbelievable to me, esp. since in his April 8, 2019 invoice estimate he wrote that gate design items would be placed to customers measurements. I was explicit that I wanted my designs to accompany the contract, but it seemed he no longer had them. A few days later, they came back to take back the gate. On July 17, 2020 my friend and I went back to the workshop to look at faulty gate and drop off yet another set of hard-copy designs, and I took careful notes about what we and Kearney agreed on. Patrick was not there, but that was actually better because it never was clear that he actually understood or would carry out the agreed actions. Eventually, they came back with the revised gate, installed it but the computer box wasn’t working and Patrick had to order another panel. So I had to keep the gate open for three weeks or so. In early Fall 2020, they got the gate to open and close, but there are still issues with it, like when they touched up the black paint on the gate, they also sprayed my house in several places; they added a ball cap instead of the flat cap on a post that we had discussed; the electrical wires they installed on the front of the post make the whole thing look cheap and he refused to put them behind the post; and the original small chain link fence up the driveway is still there even though at one of the visits to his workshop, his employee Kiernan agreed to me they would remove it."

"Mr. Colony did an outstanding job on refurbishing the barn. He had a few challenges a long the way but with his ability to listen and to see my vision of a pallet and Corigated metal wall and half tile/half epoxy floor all come to life. Very happy. He did an amazing job."