Keep your washing machine’s water where it belongs
A worn gasket is a common reason for leaky washers.
Sometimes, replacing your washing machine is the best solution.
Simple fixes are often DIYable.
Work with a professional technician for complex washing machine problems.
Uh oh. A leaking washing machine can turn your laundry room into a slippery mess—or worse, a moldy nightmare. But with a little investigating and some tips on how to fix your washing machine, you can prevent water damage from infiltrating your home. Here are six common reasons why your washing machine is leaking water and what you can do about it.
Gaskets serve as seals to keep water from leaking out of your washer, so they should be one of the first parts of your washer to investigate when there's a leak. The gasket is that squishy, black rim that lines your front-loading washing machine’s door. This mechanism can easily loosen, deteriorate, accumulate mineral deposits, or become snagged over time.
If you notice a compromised gasket, it should be a quick fix. A loose gasket may only need to be wiggled back into place. Gaskets with mineral buildup or debris may need a good cleaning. Damaged gaskets, however, need to be replaced entirely to have a secure seal. Make sure you choose the correct-sized gasket for your washer by measuring it or looking at the specs for your particular washing machine model.
Another common reason for washers to leak water is loose internal or external hoses. Damaged or improperly installed hoses typically cause a huge mess. If you notice large pools of water, then there is a good chance that your appliance’s connections are compromised.
Investigate external hoses for signs of corrosion, and give them a wiggle to see if any are loose. Internal hoses may need extra steps before you can check for signs of a leak. Remove the cabinet that houses the internal hoses, then take a peek and scan the hoses for damage or loose connections.
If you notice loose connections, you may be able to get away with tightening the clamp surrounding the house. For damaged hoses or the wrong-sized hose, you’ll need to replace the hose. Choose a compatible or manufacturer-made material when replacing the hose. It might be best to have a local appliance repair company remove and replace the hoses for a secure connection.
Washers leaking water from the bottom may have a defective drain pump. When washers have a pump that doesn't work, there could be a problem with the pump's ability to drain the water after completing the cycle. Sometimes, the pump itself is defective, while other times, the issue is a loose connection.
Loose connections may be tightened, but a faulty drain pump likely needs replacing. You’ll probably spend more on the cost of fixing your washer’s pump than you would if you replaced it. When replacing your washer’s pump, It's important to choose the right type of drain pump. Your washing machine may have a direct drive, belted, or electric system pump, so check the specs of your particular appliance before buying a replacement water pump.
Your washer’s pressure switch monitors how much water enters your washing machine. If the pressure switch has an issue, this can quickly turn your laundry room into a splash pad. Your washer won’t know when to stop filling the tub and can continue filling with water until someone intervenes.
When fixing a faulty pressure switch, it’s safer for you to hire a pro to tackle the issue. If you see pools of water around your electronics, there’s a chance of electrocution. Instead of trying to fix the problem, shut off the water to your washing machine to prevent further leakage before calling a technician or plumber. You may also want to look into how to make a water leak insurance claim with your homeowners insurance company for extensive damages. Expect to pay an emergency plumber cost of around $170 to have a pro look at the problem right away.
If your washer inlet valve is leaking, then you’ll have a more discreet leak on hand. The washer inlet valve manages the flow of water into the tub of your washing machine. This valve connects your washer to the hot and cold water hoses. If the washer inlet valve is leaking, you’ll have a steady drip of water regardless of whether your washer is on or off. Other signs include improper filling, incorrect water temperatures, and a washer that just won’t run.
Less obvious leaks are a recipe for mold, so learn how to check for mold to ensure you don’t have a mold problem on top of your leak.
Sometimes, the valve accumulates debris or mineral deposits and can start working again after a good cleaning. Thoroughly clean the filter screens and your washing machine to see if this solves the problem. If your washer inlet valve continues to leak, then you'll need to replace the water inlet valve.
A washer leaking water does not always mean that there is a problem with your washing machine. Skipping over the instructions is easy to do—after all, no one likes reading tiny and lengthy instructions on crinkly paper. However, if you don't follow the manual for your washer, then you could be setting your machine up for failure.
Always make sure that you do the following to ensure that you're correctly using your washer:
Use the correct amount of detergent.
Avoid overloading your washing machine.
Keep your washer on level ground.
Clean your detergent dispenser.
Routinely check the tub for blockages.
If you're wondering if fixing a washing machine leaking water can be a DIY project, the answer depends on the cause of the leak. Any issue that's rooted in hoses or plumbing should be handled by a pro. The same goes for any electrical issues with a washing machine. However, you may be able to tackle the job if you simply need to clean or swap out some parts.
If you need to replace your washing machine's gasket, this DIY project can be done for between $50 and $70 on average. If the washing machine's hose needs to be replaced, the DIY cost is usually below $20. Installing a new drain pump is a DIY project that can cost just $15 to $18 on average. With most plumbers and appliance repair pros charging between $45 and $200 an hour, paying for parts alone can allow you to save money if you're comfortable working on an appliance. While you may be eager to save a few bucks by trying your hand at fixing your washing machine, it's important to remember that the cost of water damage restoration that could be needed if improper repairs lead to leaks or flooding can total $1,349 to $6,222.
If you decide that it's time to call a local washing machine repair pro to help diagnose and fix a washing machine leaking water, it's important to ask the right questions. Keep in mind that a handyman who fixes washing machines isn't necessarily qualified to work on appliances just because they are willing to take on the task. Your appliance's manufacturer warranty may have strict rules regarding who can provide repairs. That's why working only with licensed appliance repair technicians is advised. Here's what to ask before agreeing to repairs:
Are you a licensed, bonded, and insured appliance repair company?
Are you certified to work on my brand of washing machine?
Is your work under warranty? How long does the warranty last?
How many years of experience does the person who will be working on my washing machine have?
Do you have references available?
How long will I have to wait for my appliance to be looked at and/or repaired?
How do you price your repair services?
How do you handle home warranty vs home insurance reimbursement and claims when an appliance has become broken or damaged?
Whether fixing your leaking washer is worth it or not really boils down to its age and the reason it is leaking. Newer washing machines with a simple, loose hose connection don’t need replacing, but older washer models with extensive internal issues are better off replacing.
Some of the most common causes of a leaky washing machine include damaged hoses and gaskets. Your washing machine contains many hoses that work together to bring water into it. When the hoses or valves become loose or deteriorate, water can easily leak out of those connections.
Water and electricity are a dangerous duo, so you should always proceed with caution as you inspect your washing machine and attempt to fix or replace any parts. We recommend working with a trained professional when you have a big leak on your machine to avoid fire risks from short-circuiting and electrocution from live wires in your appliance.
Yes, your homeowners insurance can cover water damage. Just how much your plan covers depends on the company and plan you chose, so read the fine print of your homeowners insurance plan to see how much your insurance company might cover, document the damage, and contact them to submit a claim and have an assessor inspect the damage.