The average cost of brick siding and brick veneer is $22,500 to $70,000, with a national average of $26,000. Besides the size of your home, the type of siding impacts cost the most.
The average brick siding cost, including materials and installation for a 2,000-square-foot home, is about $26,000 but can range between $22,500 at the low end and $70,000 at the high end. The cost to install brick siding and brick veneer depends on several factors, including your home’s size, the thickness of the brick, and whether you choose to use real brick or manufactured stone.
Installing brick siding is a popular method of adding richness, variety and class to a home’s exterior. Several different factors will influence your total brick siding or brick veneer siding cost, including the type of brick and the size of your home.
Siding Type | Average Cost per Square Foot | Description |
---|---|---|
Face brick siding | $4–$8 | Four-inch thick siding made out of the same materials as brick; one of the least expensive options |
Thin brick veneer strips | $3–$10 | Only an inch thick or less; veneers made from real brick but easier to install and more expensive |
Faux brick veneer | $4–$10 | Thin veneer made from manufactured stone strips |
Faux brick panel siding | $6–$11 | Larger, often more expensive siding pieces made from materials like epoxy or polyurethane instead of stone or brick |
Which type of siding you choose can have a big impact on your total cost. For example, thin brick veneer strips cost less than faux brick panel siding. While face brick siding may cost less per square foot, it comes with higher installation costs, since it takes longer to install.
Home Size (Square Feet) | Average Brick Siding Cost |
---|---|
1,500 | $6,000–$33,000 |
2,000 | $8,000–$44,000 |
2,500 | $10,000–$55,000 |
3,000 | $12,000–$66,000 |
The larger the surface area of your home’s exterior, the more you’ll have to pay to install brick siding. It costs an average of $26,000 to install brick siding or veneer on a 2,000-square-foot home. Brick siding costs an average of about $13 per square foot to fully install, though prices can range from $4 to $22 per square foot.
Additional supplies like mortar cost an average of $0.50 per square foot. Some additional materials may include water-resistant sealant, wire lath or cement backer board, specialty tools, and lumber, which all come with their own unique costs.
Labor to install brick siding or brick veneer siding costs between $3 and $20 per square foot. The labor price depends on the brick type, the size of the area, its complexity, and the pro’s installation method. For smaller jobs, bricklayers may charge by the hour instead of by square foot. This fee can run between $40 and $100 per hour.
Location can also affect the cost of installing brick or brick veneer siding. For instance, higher-cost-of-living areas, like major cities, usually have higher material and labor prices than lower-cost-of-living regions. However, if you live in a very remote or difficult-to-access area, that can also increase your costs since it will cost more for professionals to transport themselves and the materials to your home.
While you can install siding yourself, we recommend contacting a pro. Improper installation can decrease the life span of the siding and cost more money in the long run.
Depending on your project and how much DIY work you plan on handling, you may run into other costs for your brick siding, too. Here are a couple of examples.
If you have existing siding or a veneer already in place, then it needs to be removed. This demolition includes stripping the siding, removing the old parts, prying out existing nails or screws, and thoroughly cleaning the exterior wall.
Preparation may also include installing a backing material like Tyvek, as well as flashing as the edges of the siding space. These materials will add to the cost of the project, and prep steps will also extend labor time, which will likely increase your bill at the end of the project.
Most local building departments require a permit for siding installation. Check local building codes to find out specific requirements for your area and avoid potential fines. You’ll typically pay $100 to $500 for a permit to install brick siding.
Siding installers may need to add extra drainage channels or drain pipes to help protect the brick siding and let it shed moisture more easily. The additional drainage needs depend on where the wall is installed and how it connects to the foundation. These drain additions should be included in the price estimates you receive, but they will add to the bill.
Footing refers to extra ground-based stabilizers used to prop up heavy walls made of concrete and installed along the base of the brick wall. They aren’t usually needed for brick siding, but particularly heavy options like face brick siding or especially tall brick siding installations may benefit from it.
Installing brick siding isn’t a DIY-friendly task. Bricklaying requires special skill and training, and it can be difficult to lay the materials correctly without the proper experience. Improperly installed brick siding is prone to structural weaknesses and may not look as beautiful as professionally installed siding. You should call a siding contractor near you to get a quote for your brick project.
It costs an average of $4 to $11 per square foot to install brick siding yourself. You’ll still have to pay for the brick siding or veneer materials, which can run between $3 and $10 per square foot, as well as additional supplies like mortar, which can cost around $.50 per square foot.
You’ll also need supplies such as felt wrap, brick ties, and metal flashing, and you may have to purchase or rent tools such as a heavy-duty drill with a masonry drill bit, a concave jointer, and scaffolding, depending on the height of your exterior walls. These can significantly increase the cost of installing brick siding—to the point where it may make almost as much financial sense just to hire a local stone veneer company to tackle the job.
If you’re trying to cover your home with brick siding and have a tight budget, there are a few ways that you can cut costs:
Choose lower-end materials. Thin brick veneer strips range in price from $3 to $10 per square foot. Choosing something on the lower end of that price range can save you a significant amount of money when you’re talking about covering 2,500 square feet or more of an exterior wall. But keep in mind that lower prices may indicate lower quality, which could cost you in the long run.
Install brick siding on part of your home. You can cut costs by limiting the brick siding or brick veneer siding to only a portion of your home. Brick can make a nice focal point as an accent wall, and it pairs nicely with more affordable siding options, like vinyl siding.
Do it yourself: Installing brick veneer siding on your own is challenging, but it’s not impossible—if you have the necessary skills, a lot of time on your hands, and all the tools at your disposal.
Get multiple quotes: Is DIY too challenging? Don’t just hire the first contractor you find. We recommend getting quotes from at least three contractors to compare rates.
Brick siding is a popular method of increasing curb appeal, and it can add to your home’s value. It may not add as much reliable value as major renovations like a kitchen remodel would, but it can make homes easier to sell.
Brick veneers and siding also have some built-in advantages. They don’t need to be painted or sealed, so they cut down on exterior maintenance needs. While they don’t have quite the same benefits as a brick wall, they can act as an insulating layer to help keep homes cool. Don’t expect a specific percentage bump in your home value, but brick siding does offer its own kind of ROI, especially when it comes to aesthetic appeal.
Before committing to a brick siding pro, ask the following questions to ensure you’re choosing the right professional for the job.
Can I see a portfolio of past projects?
Are you licensed and insured to install brick siding?
Do you have any certifications or special training in masonry or siding installation?
From where do you source materials?
How long do you expect this project to take?
Are there any building codes or permits required for brick siding installations?
Will you handle the permit process for me?
Do you offer a workmanship warranty?
How will you handle project cleanup and disposal?
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to costquotes@angi.com. Quotes and personal information will not be shared publicly.
A brick exterior for your home has many advantages over other types of siding. While brick siding and veneer are more expensive, they’re also durable, long-lasting, and weather-resistant. Brick siding is aesthetically appealing, and can help to increase the value of your home. It’s also easy to maintain brick siding.
When you’re deciding on what type of brick siding or veneer to install, you should consider several factors, including your budget, the time it will take to finish installation, and your overall aesthetic preference. You should also consider the pros and cons of brick siding to determine whether or not it’s the right choice for you.
Brick buildings last a century or more with the proper maintenance, such as tuckpointing. Brick veneer, which is only one layer of brick, won’t last quite that long but is still a long-lasting material. When properly maintained, you can expect your brick veneer siding to last up to 50 years.
While brick is sturdy and aesthetically pleasing, it’s also an expensive siding material. Other great siding options to consider include vinyl siding, wood siding, and fiber cement siding. Vinyl siding is likely to be the most affordable option, but wood siding can create a rustic aesthetic, and fiber cement is one of the lowest-maintenance siding options available.
The cost to repair a brick wall is an average of $1,625, but prices can range between $750 and $2,500. Repair costs will depend on the type of brick, the extent of the damage, local labor rates, and the height of the wall. Repairing a brick wall yourself will save you money, but you should have prior experience working with masonry (and the right tools on hand).