Get matched with top door pros in Saxtons River, VT

"We hired Cody to do some wallboard repair and to replace 4 interior Luan doors with 4 standard Masonite slabs in existing pre-hung door frames. The wall repair came out great, but the doors turned out to be well beyond his skill level. A carpenter friend had measured and delivered the doors to us, but he became too busy to do the work so we hired Cody. Surprisingly Cody claimed the standard doors were 1/8â too wide and too tall, and that both the width and height had to be trimmed. We questioned him but trusted his â expertiseâ and relented. He wound up cutting off so much of the width and height that we are left with visible gaps between the doors and the jambs. And because the barrel of the doorknobs did not reach the strike plates, he "fixed" his mistake by â doubled upâ two strike plates on each door so three catch - the fourth still doesn't. In short, he ruined $400 worth of doors, which have to be replaced â and installed â by a competent contractor. Cody refuses to discuss a solution, claiming that he warned us that trimming the doors would be problematic, and blaming us for telling him to cut the doors â all of which we vigorously deny. He was the one who suggested the â fix,â and we trusted he knew what he was doing. It wasnâ t until he was finished that we saw the horrific mistakes and that his workmanship was abysmal. Weâ ve never written a bad review but cannot recommend Bartonâ s Perfection if you need carpentry work. His work was far from â perfection.â"

"Excellent work at a very reasonable price, and went out of their way to do extra work at no additional cost."

"This company is fantastic. They went above and beyond what was required for a small project that I didn't have the time to do myself. It's so difficult to find good people to do these jobs, so I was really grateful for the fast, reliable, and high quality service. I would hire them again in a heart beat. They got right back to me when I initially made the request for service, and even though they said they were busy, they went out of their way to accommodate my request in a short span of time. They also communicated consistently and reliably when I messaged them about the project. This company gets my highest endorsement."

"We shopped around for months before deciding on the “Kohler Bath Remodel” product. sold and installed by Rite Window in Woburn. The salesman was good and a well-trained. He got the whole show done in a hour, which at the time was appreciated. I was a bit concerned reading the reviews about issues that develop at about the 3 year mark – I guess we’ll have to see on mine. Here’s what they sell you and what you actually get. Sales person: (1) “The luxstone slabs are very heavy, about 250 lbs, and need two people to carry.” The sample (about 1 square foot) he gave us to look at was crazy thick and heavy. The actual product out of the van during install, however, was maybe 1/8” in thickness, maybe the thickness of 4 pieces of copy paper, and the whole sheet can be lifted by one person easily with one hand. Score that one as a lie – they show you a product that is purposely different than the actual. Salesman: “We are exclusive to New England, don’t use external contractors, and all installers are ‘our own’”, which to a customer suggests that they are Rite Window employees. Actually, my install was done by contractors – they pulled up in the plain white unlabeled van, and just through general discussions, do lots of different jobs. No issues with the install per se, but, yeah, score that as a lie. Salesman: “The glass we use is hotel grade, double thick 3/8 inch, and they weigh 200 lbs each”. Yeah, not so much. Standard thin grade and maybe 45 lbs at most. My biggest concern was the quality of the fixtures, and the salesman made it known that the fixtures can only be the “top of the line” Koehler fixtures “direct from their Wisconsin plant”. This made me feel better. What actually went-in to the install, however, was a plastic control valve mechanism. So much plastic, that these fixtures are similar to the ones at Home Depot right at the very end of the faucet aisle – that $12 faucet. I expected the handle to be silver-painted plastic. Yeah, not exactly top-of-the-line. The base is a basic 3’X4’ cheapo fiberglass piece you can buy right now from home depot.com ($189) and the ceiling is acrylic sheeting from JoAnne’s, maybe $15. In summary, my daughter’s EZ Bake oven is made of better materials than this shower. The thing came out very small. The installer told me, after the job was done, that he had to take space away because he only had 3 foot sheets of luxstone, and to make them fit he made the shower smaller. They couldn’t even bring the right sized panels to do the job right. Going in to this, I was more concerned about the quality of the install and I thought from the sales tactics that the product itself was top-quality. In this case, the install and the materials are complete garbage. Without the glass, the materials maybe cost them $400 in total. With the glass, it’s maybe $2,000. So now I have a beautiful home with a cheap and flimsy master shower that’s smaller than the one they replaced. Efforts to work with them led to dead ends. Basically, I was told that you get what you got. Don't deal with these fraudsters."