Barnett Basement Solutions

Description of Work: Barnett Basement Solutions provided basement waterproofing services for our home that was built in 1985. Fortunately for us and due to having water enter our basement in the past, we've had an unfinished basement since we moved into the home back in 2004. The scope of work entailed jackhammering the entire perimeter of our basement (120 linear feet) of approx 6-8" thick of hardened concrete. They then excavated with shovels (but mostly by hand) well below the concrete footer and installed perforated PVC then installed the weeping tile and then backfilled with stone and topped it off with 3" of Quik-Crete concrete. There were several small sections (behind the water heater and furnace) where acccessing the footer was not possible so they then installed a product called AmeriDrain, which is a surface drain that water enters and is funneled down to the 4" PVC below. All of the 4" PVC is tied into 2 seperate sump pumps located at opposing corners of the house. So when water runs behind the weeping tile or down into the AmeriDrain it enters the 4" PVC and runs into either of the sump pumps which is then pumped to the exterior of the house. Barnett Basement Solutions also ran all electrical supplies needed for both sump pumps.

Description of Work: Basement waterproofing and some outside drainage.