Get matched with top metal fabricators and restorers in Mayfield, PA
There are 0 highly-rated local metal fabricators and restorers.
Matching on Angi
Metal fabricators and restorers in Mayfield
Structural steel certification. Well rounded with mig tig and stick welding process. Cast steel aluminum and stainless can be done in house or in field. Handrails, staircases, equipment, trucks (bodies built) just to name a few things we usually have in shop to get done.open to anything.
Structural steel certification. Well rounded with mig tig and stick welding process. Cast steel aluminum and stainless can be done in house or in field. Handrails, staircases, equipment, trucks (bodies built) just to name a few things we usually have in shop to get done.open to anything.
Custom welding and fabrication. Cnc plasma cutting. 3D modeling software. Mobile services. Line boring. Outdoor furnace repair.
Custom welding and fabrication. Cnc plasma cutting. 3D modeling software. Mobile services. Line boring. Outdoor furnace repair.
We can weld steel, stainless steel, and aluminum. No job too big or small. 100% mobile welding and fabrication. 24/7 service. Fully insured.
We can weld steel, stainless steel, and aluminum. No job too big or small. 100% mobile welding and fabrication. 24/7 service. Fully insured.
(My Services) Welding/fabricating Small engine repairs Vehicle maintenance/repairs
"They can do just about anything. Very professional."
Sharon D on February 2022
(My Services) Welding/fabricating Small engine repairs Vehicle maintenance/repairs
"They can do just about anything. Very professional."
Sharon D on February 2022
The Roof Brothers is a family owned and operated located in Jessup. We strive to give all customers the absolute BEST!! product on the market. We have a small crew who are trained to install all of our products. The Roof Brothers is commercial and residential construction company. We can be reached at (570) 862-6775
"Roof brothers were very friendly and didn't some amazing work. And the price was very reasonable as well"
Joseph E on April 2019
The Roof Brothers is a family owned and operated located in Jessup. We strive to give all customers the absolute BEST!! product on the market. We have a small crew who are trained to install all of our products. The Roof Brothers is commercial and residential construction company. We can be reached at (570) 862-6775
"Roof brothers were very friendly and didn't some amazing work. And the price was very reasonable as well"
Joseph E on April 2019
For many years, Summit Sheet Metal LLC has been offering the most reliable and high quality metal welding and manufacturing services in the Kingston and Luzerne County areas. We are proud to be recognized as one of the area's absolute best. We specialize and work with machine shops, sheet metal companies, solar & semiconductors systems as well as and Engineering corporations. In addition, we also offer onsite services to small to medium construction projects, as well as utility company sites.
For many years, Summit Sheet Metal LLC has been offering the most reliable and high quality metal welding and manufacturing services in the Kingston and Luzerne County areas. We are proud to be recognized as one of the area's absolute best. We specialize and work with machine shops, sheet metal companies, solar & semiconductors systems as well as and Engineering corporations. In addition, we also offer onsite services to small to medium construction projects, as well as utility company sites.
Property Inspections for Home and or Buildings, Private Commercial or otherwise
"We asked our realtor for a “pit bull” inspector and she recommended this company. We were present with the inspector and asked a lot of questions and listened intently to his concerns and observations. We left feeling like we had some issues but nothing major. Well, after settlement it became clear that the inspector missed a huge carpenter ant infestation that damaged the entire back of the house including walls and beams. He missed leaking windows and pipes that had cause mold and mildew damage in two separate areas of the house. He missed several areas of roof damage and a decaying rotting exterior chime to structure. When I pointed to the ceiling and said is that brown spot a leak he said no, that’s just a missed paint spot! We made settlement after what we thought was a good inspection report. It turns out that we had to spend tens of thousands of dollars on critical repairs that the inspector missed or assured us were minor. The roof and window leaks were severe. The carpenter ant infestation was critical. Needless to say we were very angry and extremely disappointed that these things got missed and we got misled. We would not recommend this inspector to others."
Trish S on October 2020
Property Inspections for Home and or Buildings, Private Commercial or otherwise
"We asked our realtor for a “pit bull” inspector and she recommended this company. We were present with the inspector and asked a lot of questions and listened intently to his concerns and observations. We left feeling like we had some issues but nothing major. Well, after settlement it became clear that the inspector missed a huge carpenter ant infestation that damaged the entire back of the house including walls and beams. He missed leaking windows and pipes that had cause mold and mildew damage in two separate areas of the house. He missed several areas of roof damage and a decaying rotting exterior chime to structure. When I pointed to the ceiling and said is that brown spot a leak he said no, that’s just a missed paint spot! We made settlement after what we thought was a good inspection report. It turns out that we had to spend tens of thousands of dollars on critical repairs that the inspector missed or assured us were minor. The roof and window leaks were severe. The carpenter ant infestation was critical. Needless to say we were very angry and extremely disappointed that these things got missed and we got misled. We would not recommend this inspector to others."
Trish S on October 2020
Sales,service,installation , plumbing, heating, air conditioning, heat pumps, well pumps, septic pumps, water heaters, boilers, furnaces, kitchen/bathroom remodeling. Lp/natural gas, oil, electric.
Sales,service,installation , plumbing, heating, air conditioning, heat pumps, well pumps, septic pumps, water heaters, boilers, furnaces, kitchen/bathroom remodeling. Lp/natural gas, oil, electric.
Our roofing company workforce has over 25 years of experience and our staff is highly qualified and dedicated to quality assurance We install Residential and Commercial Roofing systems including insulation,ventilation,and coating systems.Emergency repair services and roof maintainance Our materials are bought from reputable trade manufacturers wholesale, allowing us to keep our prices down and quality high We're happy to answer all your questions and to give you a free quote Systems Installed Steep Sloped- Asphalt/fiberglass Shingles,Synthetic Slate,Metal Roofs,Fibercement Flat Roofs - EPDM(rubber), TPO,PVC,Modified,Elastomeric and Aluminum Coatings Manufacturers Include - Owens-Corning , CertainTeed , MuleHide , Versico , Durolast , LoManco , Airvent inc.
Our roofing company workforce has over 25 years of experience and our staff is highly qualified and dedicated to quality assurance We install Residential and Commercial Roofing systems including insulation,ventilation,and coating systems.Emergency repair services and roof maintainance Our materials are bought from reputable trade manufacturers wholesale, allowing us to keep our prices down and quality high We're happy to answer all your questions and to give you a free quote Systems Installed Steep Sloped- Asphalt/fiberglass Shingles,Synthetic Slate,Metal Roofs,Fibercement Flat Roofs - EPDM(rubber), TPO,PVC,Modified,Elastomeric and Aluminum Coatings Manufacturers Include - Owens-Corning , CertainTeed , MuleHide , Versico , Durolast , LoManco , Airvent inc.
We are a 10,000 sq ft fabrication shop with shearing, press brake and cnc machining and plasma capabilities. Products can be designed, engineered and fabricated in-house, or built from customer drawings. Small production jobs and one-offs are our specialty. We work with aluminum, stainless and structural steel and copper, both fabricating new items and repairing and rebuilding broken equipment.
We are a 10,000 sq ft fabrication shop with shearing, press brake and cnc machining and plasma capabilities. Products can be designed, engineered and fabricated in-house, or built from customer drawings. Small production jobs and one-offs are our specialty. We work with aluminum, stainless and structural steel and copper, both fabricating new items and repairing and rebuilding broken equipment.
Metal fabrication and restoration services FAQs
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.
Get our Angi-powered app
