Mobile welding and fabrication company. We offer a full range of services. Such as container and trailer repair. We can preform all processes such as Mig, Tig, Stick, oxyfuel and many more. We can weld any weldable metals in the industry steel, aluminum, stainless steel, titanium, and magnesium. Over 25 years of experience. Animal Fencing, Fencing, Fencing - Driveway Gates, Metal Fabrication & Restoration, Sheet Metal Repair, Welding
"Great! Great response & follow up, completion was timely."
Stacey W on March 2024
Mobile welding and fabrication company. We offer a full range of services. Such as container and trailer repair. We can preform all processes such as Mig, Tig, Stick, oxyfuel and many more. We can weld any weldable metals in the industry steel, aluminum, stainless steel, titanium, and magnesium. Over 25 years of experience. Animal Fencing, Fencing, Fencing - Driveway Gates, Metal Fabrication & Restoration, Sheet Metal Repair, Welding
"Great! Great response & follow up, completion was timely."
Stacey W on March 2024
Odd Job Welding is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 12 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!
"He is punctual, does excellent work and wants to work. I am well pleased with him, all around great service."
Mr. Jody . on March 2020
Odd Job Welding is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 12 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!
"He is punctual, does excellent work and wants to work. I am well pleased with him, all around great service."
Mr. Jody . on March 2020
We can weld stainless steel carbon steel and we can do copper brazing and soft solder we can do thread pipe and just general welding and fabrication high quality work not just your average worker we can stick tig and MiG inner shield and MiG with gas and where mobile
We can weld stainless steel carbon steel and we can do copper brazing and soft solder we can do thread pipe and just general welding and fabrication high quality work not just your average worker we can stick tig and MiG inner shield and MiG with gas and where mobile
Welding and fabrication
Welding and fabrication
At DDK, we excel in the art of deck design, construction, and installation. With a wealth of experience and unwavering dedication, we ensure the job is not just completed but perfected. Our commitment extends to delivering a timeless deck, allowing you to relish its beauty for years to come. In addition to our specialization in deck services, we take pride in offering top-notch remodeling solutions. Your satisfaction is our guarantee, and we persist until every detail is meticulously handled. If you're seeking superior quality and reliability, reach out to us today for your complimentary estimate. Call or click to take the first step towards enhancing your outdoor space!
"The area below the deck was covered with an oily, greasy, slippery residue ie, flagstone patio, stucco house walls, stone support pillars for deck, and numerous potted and bedding plants. Even the doormat was greasy. It had been explained to me that there would be a waiting period of 3 wks between the power wash of the joists and the spraying of the sealant. After the power wash I texted to remind the contractor for the stone area and plants to be covered, but did not know that the sealant would be applied the very next day to wet wood…and without any protective covering to the patio, pillars, house, and plants. Windows thankfully were covered. I slipped on the greasy doormat when I discovered the problem the next morning. I was not at home the day of the spraying. The cans left in the driveway said not to spray on wet wood, to protect areas/plants/objects not being sprayed, and remove immediately any overspray with compliant cleaner. I made the first payment for materials at Lowe’s ($3182.99) in July. The second payment was for posts and 2x4 wood ($1800-no receipt given) combined together with $7000 requested by contractor unexpectedly one Friday afternoon. He usually just dropped by- no appts or advance notice. Contractor left immediately after getting my check to “pay my guys”. At this point I have paid $11,982.01 toward the $14,500 contract, leaving approximately $2517. 01. Although Gerry has made numerous trips to my home, he has not brought me a copy of my signed contract or the second receipt for more materials -$1800. I asked at least 3-4 times for these documents. There was some adjustment to the original design because I did not want the small pickets seated on a huge horizontal 2x6 board. This necessitated a return of the bottom boards in exchange for smaller 2x4 boards which were then placed vertically at top and bottom to hold pickets. At the beginning of the project, I pointed out to the contractor that one of the existing posts had wood rot. Another post was unstable and I approved new posts. I had 7. He put in 14 per code but they were much smaller than original ones. That was ok with me. I have no receipt for the post wood (part of the $1800 I think) but a neighbor-house builder-contractor came by and checked Lowe’s cost for posts between $800-900. Other material might have been in that rounded figure, but again, I have no receipt. All of those posts were installed, but several were then removed because of damaged wood. I don’t feel I should pay labor twice for those posts, nor do I believe that the labor costs boosted my expenses to $18,000, a total figure the contractor jotted on a note paper, but we never discussed a new figure. Last week I asked to meet with the contractor at his convenience and asked again for him to bring my signed contract and receipts for the $1800 for “materials”. He chose 2 pm Friday, but at 3pm, I texted because he was not there. At 3:15 I told him we would need to reschedule. I had 2 appts with stone masons to assess the damage to my stonework. Both were shocked at the damage and explained that flagstone absorbs oil and power washing would not remove all the blotchy stains. They also looked at the pillars and chimney stone which was turned dark from the oil and the gravel in the driveway which was turned black. There were oil drip lines on the stucco walls and a few areas where stones had been broken from the chimney, patio, and a post. They described the procedure for removing stones to replace damaged areas so they would not be “puzzled” in with small pieces. Those areas needed to be rebuilt. Someone glued random stones into the patio and chimney with white apoxy on Friday after 5 pm after I left for dinner. These areas will need to be removed and properly repaired. I contacted an attorney at the suggestion of the stone masons and the staff at Sherman Williams Paint store when I showed them pictures. The staff at Sherman Williams also said the wood should have been dried for 3weeks, even tho it was treated wood. When I texted the contractor that I needed an attorney, he wanted to pressure wash the patio etc and put siding in 2 places and then he would be “finished”. I believe the patio and stonework Will need some significant repairs and the contractor’s liability insurance might need to be explored. I cannot make a further payment until the stone damage has been corrected by a stonework professional and a final figure is fairly negotiated. I don’t think the expense of righting my property damage and getting legal advice to do it is my responsibility."
S R on September 2024
At DDK, we excel in the art of deck design, construction, and installation. With a wealth of experience and unwavering dedication, we ensure the job is not just completed but perfected. Our commitment extends to delivering a timeless deck, allowing you to relish its beauty for years to come. In addition to our specialization in deck services, we take pride in offering top-notch remodeling solutions. Your satisfaction is our guarantee, and we persist until every detail is meticulously handled. If you're seeking superior quality and reliability, reach out to us today for your complimentary estimate. Call or click to take the first step towards enhancing your outdoor space!
"The area below the deck was covered with an oily, greasy, slippery residue ie, flagstone patio, stucco house walls, stone support pillars for deck, and numerous potted and bedding plants. Even the doormat was greasy. It had been explained to me that there would be a waiting period of 3 wks between the power wash of the joists and the spraying of the sealant. After the power wash I texted to remind the contractor for the stone area and plants to be covered, but did not know that the sealant would be applied the very next day to wet wood…and without any protective covering to the patio, pillars, house, and plants. Windows thankfully were covered. I slipped on the greasy doormat when I discovered the problem the next morning. I was not at home the day of the spraying. The cans left in the driveway said not to spray on wet wood, to protect areas/plants/objects not being sprayed, and remove immediately any overspray with compliant cleaner. I made the first payment for materials at Lowe’s ($3182.99) in July. The second payment was for posts and 2x4 wood ($1800-no receipt given) combined together with $7000 requested by contractor unexpectedly one Friday afternoon. He usually just dropped by- no appts or advance notice. Contractor left immediately after getting my check to “pay my guys”. At this point I have paid $11,982.01 toward the $14,500 contract, leaving approximately $2517. 01. Although Gerry has made numerous trips to my home, he has not brought me a copy of my signed contract or the second receipt for more materials -$1800. I asked at least 3-4 times for these documents. There was some adjustment to the original design because I did not want the small pickets seated on a huge horizontal 2x6 board. This necessitated a return of the bottom boards in exchange for smaller 2x4 boards which were then placed vertically at top and bottom to hold pickets. At the beginning of the project, I pointed out to the contractor that one of the existing posts had wood rot. Another post was unstable and I approved new posts. I had 7. He put in 14 per code but they were much smaller than original ones. That was ok with me. I have no receipt for the post wood (part of the $1800 I think) but a neighbor-house builder-contractor came by and checked Lowe’s cost for posts between $800-900. Other material might have been in that rounded figure, but again, I have no receipt. All of those posts were installed, but several were then removed because of damaged wood. I don’t feel I should pay labor twice for those posts, nor do I believe that the labor costs boosted my expenses to $18,000, a total figure the contractor jotted on a note paper, but we never discussed a new figure. Last week I asked to meet with the contractor at his convenience and asked again for him to bring my signed contract and receipts for the $1800 for “materials”. He chose 2 pm Friday, but at 3pm, I texted because he was not there. At 3:15 I told him we would need to reschedule. I had 2 appts with stone masons to assess the damage to my stonework. Both were shocked at the damage and explained that flagstone absorbs oil and power washing would not remove all the blotchy stains. They also looked at the pillars and chimney stone which was turned dark from the oil and the gravel in the driveway which was turned black. There were oil drip lines on the stucco walls and a few areas where stones had been broken from the chimney, patio, and a post. They described the procedure for removing stones to replace damaged areas so they would not be “puzzled” in with small pieces. Those areas needed to be rebuilt. Someone glued random stones into the patio and chimney with white apoxy on Friday after 5 pm after I left for dinner. These areas will need to be removed and properly repaired. I contacted an attorney at the suggestion of the stone masons and the staff at Sherman Williams Paint store when I showed them pictures. The staff at Sherman Williams also said the wood should have been dried for 3weeks, even tho it was treated wood. When I texted the contractor that I needed an attorney, he wanted to pressure wash the patio etc and put siding in 2 places and then he would be “finished”. I believe the patio and stonework Will need some significant repairs and the contractor’s liability insurance might need to be explored. I cannot make a further payment until the stone damage has been corrected by a stonework professional and a final figure is fairly negotiated. I don’t think the expense of righting my property damage and getting legal advice to do it is my responsibility."
S R on September 2024
Hi I'm taryl I'm a young guy trying to get business to grow I am a welder and Fabricater and I repair equipment, build handrails, gates, fences, stalls, and other I like to do good work for people and do it right
Hi I'm taryl I'm a young guy trying to get business to grow I am a welder and Fabricater and I repair equipment, build handrails, gates, fences, stalls, and other I like to do good work for people and do it right
I have been welding for 20+ years. I do Welding, Repairs, & Modification Pipe & Structural Certified Welding Inspector
"Phenomenal craftsmanship. Very polite and respectful. Arrived in a very timely manner, quick responses. Would highly recommend to anyone looking for some welding work done. Not only a Mobile Welder. But I also found out he can weld aluminum as well and he will definitely be called for that project also. When they say "A job well done" that's SOUTHERN WELD CO all day."
Dustin B on November 2020
I have been welding for 20+ years. I do Welding, Repairs, & Modification Pipe & Structural Certified Welding Inspector
"Phenomenal craftsmanship. Very polite and respectful. Arrived in a very timely manner, quick responses. Would highly recommend to anyone looking for some welding work done. Not only a Mobile Welder. But I also found out he can weld aluminum as well and he will definitely be called for that project also. When they say "A job well done" that's SOUTHERN WELD CO all day."
Dustin B on November 2020
With over 10 years of experience in the home maintenance industry, Asheville Welding is your industry expert in Asheville. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. As a family owned and operated business, you can trust that we will treat your home as we would treat our own. Offering mobile welding, custom handrails, structural welding and much more. Give us a call today we look forward to working with you!
"It was excellent. They were very respectable, cleaned up the job site, and I would highly recommend them and hire them again."
Sachel T on January 2020
With over 10 years of experience in the home maintenance industry, Asheville Welding is your industry expert in Asheville. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. As a family owned and operated business, you can trust that we will treat your home as we would treat our own. Offering mobile welding, custom handrails, structural welding and much more. Give us a call today we look forward to working with you!
"It was excellent. They were very respectable, cleaned up the job site, and I would highly recommend them and hire them again."
Sachel T on January 2020
Factory direct metal roofing, made to order, competitive pricing, no middleman, fast delivery within 24 hours
Factory direct metal roofing, made to order, competitive pricing, no middleman, fast delivery within 24 hours
Viking Steel Structures is the nation’s 1 dealer for all your metal building needs, from carports, garages, barns, RV covers to agricultural and commercial metal buildings. We are one stop destination for all your Metal Buildings needs and provide exceptional customer service with the shortest lead times. We offers: Commercial metal buildings – engineered to exact specifications. American made steel buildings with a thicker steel gauge – 12-GA metal buildings. Metal Carports in all sizes, shapes, and colors - Based on Your Needs. Great-looking custom steel garages and sheds. Side-entry garages – save money with our 2-car, 3-car & 4-car metal garages Strong & Reliable Metal Barns, Lean-to metal buildings, workshops, commercial buildings and garages RV and motor-home covers Best Metal Building Prices, Shortest Lead Time, Fast Delivery, Free Installation
Viking Steel Structures is the nation’s 1 dealer for all your metal building needs, from carports, garages, barns, RV covers to agricultural and commercial metal buildings. We are one stop destination for all your Metal Buildings needs and provide exceptional customer service with the shortest lead times. We offers: Commercial metal buildings – engineered to exact specifications. American made steel buildings with a thicker steel gauge – 12-GA metal buildings. Metal Carports in all sizes, shapes, and colors - Based on Your Needs. Great-looking custom steel garages and sheds. Side-entry garages – save money with our 2-car, 3-car & 4-car metal garages Strong & Reliable Metal Barns, Lean-to metal buildings, workshops, commercial buildings and garages RV and motor-home covers Best Metal Building Prices, Shortest Lead Time, Fast Delivery, Free Installation
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.