Get matched with top metal fabricators and restorers in Truckee, CA
There are 2 highly-rated local metal fabricators and restorers.
Metal fabricators and restorers in Truckee
Devil Mountain Landscape (DML) started in Danville, CA in the late 80’s working with a local Nursery Company, Developers (Commercial) and Single Family Homeowners (Residential). The Company officially went independent in 1993 and continued through present day. Commercially we contracted for entire sub-divisions to install all the front yards to individual homes along with the access points and entrances to include large-scale Country Clubs (e.g. Blackhawk C.C.) as well. In 2003, we established State-wide Contracts with Insurance Carriers to Repair & Install Fences (Wood, Iron & Vinyl). In 2010, we began to expand our offering into Block Walls (Masonry & Retaining). In 2017, we became a Preferred Vendor for Construction Loans with U.S. Bank and built several homes in the South Bay (Los Gatos to Gilroy) from $1.5M to 3.0M. In 2019, we migrated to the Sacramento area focusing on Detached Garages and Granny Homes under 1,200 Sq. Ft. We offer extreme diversity to limit the number of Sub-Contractors necessary for any project while maintaining high quality and competitive pricing, so you (the Homeowner) end up with your vision of what your property should look like at a reasonable Cost. We have multiple licenses: C-13 (Fencing), C-27 (Landscaping) & B (General Building). For a small Company, we have a big foot print. We have the right mix of equipment and human resources for any size project. Please don’t hesitate to inquire.
"Had a big obstacle with a 50+ year old HUGE tree to deal with on top of shallow gas lines, and they found a way to make it work and gave me a beautiful fence and gate. Very personable and easy to work with."
Tristine M on October 2024
Devil Mountain Landscape (DML) started in Danville, CA in the late 80’s working with a local Nursery Company, Developers (Commercial) and Single Family Homeowners (Residential). The Company officially went independent in 1993 and continued through present day. Commercially we contracted for entire sub-divisions to install all the front yards to individual homes along with the access points and entrances to include large-scale Country Clubs (e.g. Blackhawk C.C.) as well. In 2003, we established State-wide Contracts with Insurance Carriers to Repair & Install Fences (Wood, Iron & Vinyl). In 2010, we began to expand our offering into Block Walls (Masonry & Retaining). In 2017, we became a Preferred Vendor for Construction Loans with U.S. Bank and built several homes in the South Bay (Los Gatos to Gilroy) from $1.5M to 3.0M. In 2019, we migrated to the Sacramento area focusing on Detached Garages and Granny Homes under 1,200 Sq. Ft. We offer extreme diversity to limit the number of Sub-Contractors necessary for any project while maintaining high quality and competitive pricing, so you (the Homeowner) end up with your vision of what your property should look like at a reasonable Cost. We have multiple licenses: C-13 (Fencing), C-27 (Landscaping) & B (General Building). For a small Company, we have a big foot print. We have the right mix of equipment and human resources for any size project. Please don’t hesitate to inquire.
"Had a big obstacle with a 50+ year old HUGE tree to deal with on top of shallow gas lines, and they found a way to make it work and gave me a beautiful fence and gate. Very personable and easy to work with."
Tristine M on October 2024
Here at Fox Welding we are a full service licensed and insured mobile welding company. No onsite welding project is out of our wheelhouse and we pride ourselves on keeping our customers happy and getting the job done the right way. Call now for a free quote.
"My welder Kassie did a great job on my project and I would definitely recommend her to anyone who needs high quality welding done."
Paul S on April 2023
Here at Fox Welding we are a full service licensed and insured mobile welding company. No onsite welding project is out of our wheelhouse and we pride ourselves on keeping our customers happy and getting the job done the right way. Call now for a free quote.
"My welder Kassie did a great job on my project and I would definitely recommend her to anyone who needs high quality welding done."
Paul S on April 2023
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Over 12 years experience
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Over 12 years experience
Custom Fabrication, Patios & Shade Covers, Steel Erection/Framing, Metal Repairs, Gates, Fences, Equipment Repairs, Mobile Welding, Landscaping
Custom Fabrication, Patios & Shade Covers, Steel Erection/Framing, Metal Repairs, Gates, Fences, Equipment Repairs, Mobile Welding, Landscaping
Hey there, My name is Andrew! My vision is to be the go-to welding and fabrication service provider in Roseville , known for my exceptional craftsmanship, attention to detail, and unmatched customer service. I aim to build lasting relationships with my clients based on trust, reliability, and the genuine care that only an owner-operator can provide.
Hey there, My name is Andrew! My vision is to be the go-to welding and fabrication service provider in Roseville , known for my exceptional craftsmanship, attention to detail, and unmatched customer service. I aim to build lasting relationships with my clients based on trust, reliability, and the genuine care that only an owner-operator can provide.
Drake Co. is full service steel fabrication company. Specializing in custom home structural and architectural steel. anything from gate and railings, to stair stringers and house framing. the Drake family has been building homes in the Tahoe-Truckee area for the past 40 years.
Drake Co. is full service steel fabrication company. Specializing in custom home structural and architectural steel. anything from gate and railings, to stair stringers and house framing. the Drake family has been building homes in the Tahoe-Truckee area for the past 40 years.
Drake custom builder and remodeler ground up builder to small projects . excavation concrete ,framing , electrical , plumbing , siding , decks, roofing , sheet rock , painting most work done in house to keep project on time line
"They were on time, they were here when they said they would, and they did a good job."
Greg C on January 2023
Drake custom builder and remodeler ground up builder to small projects . excavation concrete ,framing , electrical , plumbing , siding , decks, roofing , sheet rock , painting most work done in house to keep project on time line
"They were on time, they were here when they said they would, and they did a good job."
Greg C on January 2023
Services: Fabrication, Custom Gates, handrails, Industrial Furniture, Mobile Welding, Emergency Welding Repair, structural welding. I pride myself on excellent-quality work at a fair price. I am a certified welder with over 18 years of welding and construction experience building my own business from the ground up.
Services: Fabrication, Custom Gates, handrails, Industrial Furniture, Mobile Welding, Emergency Welding Repair, structural welding. I pride myself on excellent-quality work at a fair price. I am a certified welder with over 18 years of welding and construction experience building my own business from the ground up.
Mobile welding repair Metal supplies Home garden supply
Mobile welding repair Metal supplies Home garden supply
Weiler Metal excels in custom metal fabrication and project design services in Lake Tahoe. We produce practical, functional and artistic metal work of the highest quality and craftsmanship. Our work has been featured in Tahoe Quarterly and on HGTV. - Metal Fabrication - Contract Ornamental Metal Work - Project Design & Layout - Mechanical Fabrication Work - Custom Car Design & Build Contractor's License Number: 1004664
Weiler Metal excels in custom metal fabrication and project design services in Lake Tahoe. We produce practical, functional and artistic metal work of the highest quality and craftsmanship. Our work has been featured in Tahoe Quarterly and on HGTV. - Metal Fabrication - Contract Ornamental Metal Work - Project Design & Layout - Mechanical Fabrication Work - Custom Car Design & Build Contractor's License Number: 1004664
Metal fabrication and restoration services FAQs
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.
Get our Angi-powered app
