Before pulling up your lawn, always double-check if your homeowners association or local municipal organizations regulate making major changes to your lawn. For example, chemical removal may be out of the question in some areas. Other areas may require special permits to mark your lawn for water and electrical lines before proceeding. With these factors in mind, consider the best option below.
1. Use a Sod Cutter to Remove Grass
Rent a walk-behind sod cutter from your local landscape or hardware store to avoid the difficult work of removing sod with a shovel. Sod cutters create an even slice several inches below your turf to remove the grass, roots, and the top layer of soil. This deep cut will keep grass and weeds from growing back, and it leaves an even layer of soil.
Mark large obstructions in your yard, such as sprinkler heads, buried rocks, large tree roots, and utility lines, and plan your sod-cutting route.
Put on safety gear, including eyewear, ear protection, gloves, and closed-toe or protective footwear.
Follow the machine's instructions to cut the sod.
Roll up and remove strips of cut turf.
2. Digging Grass Up
Removing smaller grass areas is doable with a shovel, but it’s far more labor-intensive. The grading beneath your shoveled grass will not be as even as when using a sod cutter. It is also easier to miss persistent weed roots with this method. However, removing grass with a shovel is an option for small flower beds or when replacing a trouble spot in your lawn.
Mark out the area of lawn you wish to remove with marking paint or stakes.
Dig out the desired section and level off with a garden rake or equivalent tool.
Use a garden tiller to help break up the soil before or after digging the grass.
3. Spread Herbicides on Grass
There's no question that a nonselective herbicide is the least labor and time-intensive way to remove grass, but it's not ideal in all situations. Some local municipalities do not allow the extensive use of herbicides, especially if your lawn is prone to runoff into local water systems.
If you’re removing grass with herbicides, wear protection over your eyes, ears, hands, and skin. You should also fence off the edge of your lawn before applying to keep people and pets from exploring the area.
Wear protective clothing, including safety goggles, a protective suit, gloves, and closed-toe footwear.
Apply the herbicide by carefully following the manufacturer's instructions for your chosen product.
Wait seven to 14 days and rake away the debris.
4. Try Out Solarization
If you have bright, direct sunlight on your lawn—and between six and eight weeks to complete the process—solarization is a trustworthy way to remove grass, weeds, and pests without chemicals.
This grass-removal process requires you to cover your lawn with a thick, clear plastic sheet for six to eight weeks to kill off the grass and weeds underneath it, using heat from the sun.
You can use black or dark plastic as an alternative method that uses the ground's heat for a similar effect. Using dark plastic also kills the lawn by not allowing photosynthesis. This dark-plastic method is often more effective than using clear plastic in Northern regions that don't experience as much direct sunlight.
Roll out and securely stake the large plastic sheeting in place. Using heavy objects such as smooth stones or sandbags can hold it down without damaging the plastic.
Wait between four and eight weeks.
Remove the plastic and rake away the debris if necessary.
5. Use Sheet Mulching or Smothering and Composting
Sheet mulching is another chemical-free way to remove grass. Many people refer to the process as smothering and composting. Either way, the process breaks down any plants beneath a layer of newspaper or cardboard—known as a weed barrier—and mulch without damaging the soil. When executed correctly, the grass will decompose in four to six months.
Fully cover the grass you intend to remove with a single layer of newspapers or untreated and unwaxed cardboard.
Cover the material with a roughly 3-inch layer of compost containing leaves, grass clippings, and other yard waste.
Allow the setup to work for up to six months.