How Much Does Soffit and Fascia Repair Cost? [2025 Data]

Soffit and fascia repair jobs cost between $600 and $6,000. If you have a roof, you likely have both soffit and fascia, even if you don’t know it. Soffit is the board that bridges the gap between a home’s siding and roofline, while fascia is a horizontal board located outside the soffit, which holds the gutters. These essential yet often overlooked roofing components can succumb to water damage due to water flowing off the roof, overflowing gutters, or ice damming in cold climates. As you shop around for the best contractor to deal with soffit and fascia damage, you should size up the potential costs.

Soffit and Fascia Repair Cost Factors

Qualified soffit and fascia pros often give estimates free of charge, so you can figure out how much repair is necessary. Assessing soffit and fascia repair needs is also a feature of a roof inspection. Depending on the complexity of your roof and the level of damage, it may be prudent to repair some boards while totally replacing others.

Here’s a detailed breakdown of how you can expect to spend your money when hiring a roofer, contractor, or gutter specialist to fix or replace damaged soffit and fascia.

Type of Repair

The type of damage your soffit and fascia needs to have repaired can affect the cost of the project. Some types of repairs, like repairing dry rot, require more extensive and expensive repairs than others, like minor water damage.

Animal or Insect Damage

Bees, wasps, small rodents, birds, and other pest invaders can damage your soffit and fascia to build their nests or gain access to your attic. Repairing insect or animal damage and removing nests can cost between $75 and $2,000.

Water Damage

Water damage can compromise your soffit and fascia, and although wood is more susceptible to damage, any type of soffit and fascia material can succumb to water damage. Repairing damage to your soffit and fascia from clogged gutters or poor roof drainage costs $10 to $23 per linear foot.

Dry Rot

Dry rot damage is caused by fungal growth, and can cause serious damage to soffit and fascia. The cost of repairing dry rot depends on the extent of the damage, but expect to pay between $500 to $4,000 for damaged soffit and fascia.

Type of Soffit and Fascia

Repair costs vary when it comes to different soffit and fascia materials. While wood is the most cost-effective material to install, it’s also the most prone to damage and will require more frequent repair or replacement. More expensive materials like aluminum and vinyl may have a higher up-front cost, but they’re more durable, so they won’t need as many repairs.

Size

How much your soffit and fascia repair will cost depends on the size of the damaged area. Repairing or replacing a short section will cost less than more extensive damage, and you’ll save on repair costs if only the soffit or fascia is damaged instead of both.

Warranties

Some manufacturers and contractors offer warranties on soffit and fascia installation, so if you need repairs, they may be covered by your warranty. Check with the manufacturer or installer to find out what kind of damage is covered and how long you have to make a claim after installation.

Maintenance Plans

Since soffit and fascia can get damaged over time with exposure to the elements, some installers offer maintenance plans to keep them in good condition. Minor repairs are often covered under maintenance plans, so it may be worthwhile to enroll in one to prevent damage and ensure small repairs are handled quickly and correctly.

Labor 

Roofers and related pros charge an average of $40 to $80 per hour. If they need to replace fascia and soffit boards, expect to pay about $6 to $20 per linear foot for fascia and $1.50 to $3 per square foot for soffit.

Accessibility also factors into total labor costs. If your roof features a complex design or your boards are difficult to reach, count on a 7% to 15% increase for labor.

Eave Configuration

Not all roofs are equal, and the configuration of your roof eaves can impact the overall cost of your fascia and soffit repair job. Set aside an extra 5% for labor if your eave features nailed-in drip edges and weather sheathing. Also, soffit is occasionally attached directly to the back edge of fascia boards, leading to increased labor costs.

Drip Edges and Gutter Replacement 

Drip edges and gutters often need replacement at the same time as fascia and soffit boards. Drip edges, which direct water to the gutters, cost around $1 to $2 per linear foot installed. Local gutter contractors charge about $100 to $1,100 to replace a gutter, depending on the type and how hard it is to remove the original gutters.

Upgrading Soffit Vents

Soffit keeps your attic adequately vented, inhibiting the growth of mold and keeping humidity low. If you have an older home, you may need to upgrade the soffit vents to ensure adequate airflow. Why not do this while getting the boards replaced or repaired? Replacing soffit vents cost about $3 to $5 per square foot.

Painting

Many paint their fascia and soffit boards to complement the rest of the roof and the house’s exterior. While your pro is repairing or replacing your boards, it is likely a good time to squeeze in a paint job. Painting fascia and soffit boards cost around $2.50 to $6.50 per linear foot. Vinyl, composite, and aluminum boards come pre-painted but tend to need a new paint job after a few years of use.

Bees, Wasps, and Hornets

Bees, wasps, and hornets love nesting in soffit and fascia boards. If your pro discovers multiple nests while checking out your roof, you may need to call in a pest removal specialist before going forward with the repair job. Removing a beehive or wasps’ nest costs between $75 to $2,000 on average, depending on the infestation’s size and the job’s complexity. Always opt for relocation instead of extermination for bees, as honey bees are responsible for pollinating 80% of the world’s flowering plant pollination.

Soffit and Fascia Repair vs. Replace

Soffit and fascia repair most often involve replacing the damaged section of material. Some minor repairs, like patching small holes or rehanging dislodged boards, don’t require replacement, but for most types of damage, including water damage, dry rot, and significant cracks or tears, replacement is the fastest and most cost-effective way to go.

DIY vs. Hiring a Pro to Repair Soffit and Fascia

Handy homeowners can repair or replace their own soffit and fascia in some cases. Minor repairs or replacing small sections that are easily accessed can be a DIY project if you can safely work on a ladder and have experience with this kind of installation. 

A local roof repair contractor can fix your damaged soffit and fascia quickly and safely for more extensive repairs or if you aren't comfortable working on a ladder. 

How to Save Money on Soffit and Fascia Repair

You can save the cost of labor by repairing your own soffit and fascia, but even if you aren’t able to tackle the job yourself, you can still save. Ask your roofing contractor about bundling work if you need your gutters replaced or repaired—some companies will offer a discount to do all the work at once. Also, be sure to get price quotes from at least three contractors and compare what each entails to get the best value.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.