How Much Does an Endless Pool Cost? [2025 Data]

Endless Pool Size

One of the details that makes an endless pool price unique compared to the cost of a lap pool is its size. Endless pools are 6 to 20 feet long and 6 to 12 feet wide. They are traditionally just over 3 feet deep. While there is no direct per-square-foot price for endless pools, these measurements align with paying between $250 and $300 per square foot, depending on finishes and features.

Aboveground vs. In-Ground

You'll find one of the largest price gaps between in-ground and aboveground endless pools. Not only do aboveground endless pools require less site preparation, but they often come preassembled as well.

Aboveground Endless Pool

An aboveground endless pool costs between $23,000 and $35,000 on average, not including the cost to ensure the concrete slab below the pool can hold the structure. Since most aboveground endless pools require a surface that can hold at least 250 pounds per square foot, additional site work may be required.

In-Ground Endless Pool

In-ground endless pool systems start around $32,000 and $40,000 on average, though indoor in-ground pools can reach up to $60,000. The type of terrain required for the excavation, the size of the pool, and local labor costs in your area will all play a role in the bottom line.

Labor

Labor accounts for a tenth to a third of the total price, or up to $7,000. Many brands include installation costs in the total price, but be sure to check what is included. Additional excavation, plumbing hookups, and electrical wiring are often extra. For example, hiring a pool electrician—particularly for a pool with a motor—is a smart choice. 

Location

Like other pool costs, the price of installing an endless pool varies from state to state. This is because local labor rates vary significantly, greatly impacting the overall price. Other reasons include the cost of permitting and regulations, climate considerations, and market demands.

Additional Costs to Consider 

Where you place your pool, added electrical work, your choice of features and finishes, and other details can also increase the overall cost of your endless pool. Here’s what to know before you put in a pool.

Endless Pool Placement

You can install an endless pool in your backyard, build one into a patio, or even put one in your garage. Unsurprisingly, the cost of an indoor in-ground pool (up to $315 per square foot) runs higher than an outdoor installation. In addition to the excavation costs, you'll need to incorporate a dehumidifying system, waterproofing, plumbing alterations, and possibly an enclosure.

Outdoor endless pools include more budget-friendly models and less expensive alternatives. Prices for an outdoor endless pool fall closer to $250 per square foot, or between $23,000 and $40,000.

Excavation and Leveling

Changes to your land or home foundation are one of the first indications of your endless pool cost. The cost of excavating an in-ground pool falls between $400 and $1,500. Professionals will charge an average of $120 to $150 per hour to accommodate various types of land.

A level plot of land is equally important for an in-ground or aboveground endless pool. Leveling your yard costs between $1 and $2 per square foot. Keep in mind that you will need to level the area surrounding your endless pool for a pool deck and the appropriate hardware.

Electrical Work

Some homes need additional electrical wiring or an extra electrical panel to power an endless pool. Upgrading an electrical panel costs an average of $1,600. Extra outlets add between $100 and $185 each.

Finishes

Most endless pools come pre-assembled with the appropriate plumbing, heaters, wiring, and jets to attain the design current. Most standard endless pools come with a steel case and a vinyl lining. Custom models by a designer may include fiberglass or gunite as a base.

The cost of the finish of a swimming pool, including an endless pool, is another factor to consider. Here are some square-foot prices to keep in mind.

Features

As you peruse popular brands of endless pools, you'll spot differences in the models based on available features. Simple endless pools with a single adjustable current will fall on the low end of our price range, whereas models with spa and smart options will push the price higher. Here are some common features of the deluxe models.

• Cool-down benches

• Jet speed variations

• Double propulsion systems

• Massage jets

• Additional lighting

• Bluetooth speakers

• Pool heaters

Permits

Installing an in-ground pool will almost always incur a permit fee from your local municipal office. Pool permits range between $400 and $1,800 on average, so chat with your installer about what they know regarding pulling permits before starting. Aboveground pools require permits in some areas but not others. You may also need to meet additional requirements for adding plumbing or wiring to the area.

Water

The cost to fill a pool ranges from $0.03 to $.10 per gallon if you hire a water delivery service. Some homeowners choose to pay for the water themselves and fill their pool with a garden hose. Check local laws regarding using your own water before proceeding.

Cost of Common Endless Pool Add-Ons

An endless pool can be a haven for exercise and relaxation. Not only should it welcome you to hop in for an infinite series of laps, but it should also be and cozy for a daily dip. Here are some common add-on costs that may contribute to the overall price tag.

• Workout Equipment: Some endless pools feature workout equipment, such as a treadmill or exercise water bike. These can cost an extra $10,000–$15,000. In some cases, higher-end endless pool models include these add-ons for less.

• Pool Enclosures: The middle ground between an indoor and outdoor pool is a pool enclosure. The average cost of a pool enclosure hovers around $12,200, but small DIY pool enclosure kits can cost $3,900.

• Hardscaping and Landscaping: A small pool deck between 300–600 square feet costs $1,000–$5,000. Landscaping costs around a gunite pool can add another $1,300–$6,100.

Ongoing Expenses

Your costs won’t end once the installation team heads out—ongoing upkeep is an investment, too. Here are the ongoing costs to consider for an endless pool.

• Operation: The cost to run an endless pool averages $20 to $50 per month.

• Maintenance: Expect to spend between $960–$1,800 per year for the cost of maintaining a pool, including chemicals, cleaning, and filters. 

• Repairs: Many common pool repair prices also apply to endless pools. Pool repair labor averages $45–$65 per hour, along with materials. Pump motor repairs cost up to $650, while drain repairs cost $400–$700. In most cases, hiring an endless pool specialist—particularly for your brand—is your best bet.

DIY vs. Hiring a Pro

While many endless pool companies offer DIY models, it is best to hire a local pool installer. Even aboveground pools often require a permit and a professional to ensure your ground is strong and level enough for the pool. Errors can be costly and dangerous if done incorrectly.

That said, if you have the green light from your town, you can learn how to install an aboveground pool by yourself. The job is only best for an experienced DIYer, though.

Ways to Save Money on an Endless Pool

Any type of pool is an investment, but there are plenty of ways to keep up-front and ongoing costs under control. First of all, always explore at least three different endless pool suppliers before making your decision. Confirm their warranty options, installation fees, and reviews from customers in your area. Here are some additional tips to keep endless pool prices lower.

• Install your endless pool in the winter to avoid peak prices

• Have a flexible installation timeline

• Consider a standard-sized endless pool without customizations

• Opt out of fancy add-ons if you're not sure you’ll use them

• Consider an outdoor pool instead of an indoor one to avoid higher installation costs

• Avoid suspiciously low prices and companies that rely too heavily on DIY installation

Are Endless Pools Worth It? 

Deciding whether an endless pool is worth the expense depends on your preferences, intended use, and budget considerations. Here are a few key factors to consider based on your unique needs:

• Space Efficiency: Endless pools fit in compact spaces, making them suitable for homes with small yards.

• Year-Round Use: With proper installation, your endless pool can be used all year long, regardless of the weather.

• Customizable Features: You can adjust the water current to match your swimming speed, which lets a single pool cater to beginners and advanced swimmers.

• Lower Maintenance Costs: Endless pools consume less water and energy and fewer chemicals than traditional pools, so you can enjoy a watery workout alongside lower utility bills and maintenance expenses.

• Up-Front Investment: These pools come with significant up-front costs. The cost of site preparation, installation, and pool materials starts at around $10,000 and rises quickly with the size, complexity of the job, and number of custom features.

• Limited Space: While they’re perfect for continuous swimming, endless pools are compact and not meant to accommodate the same large gatherings or recreational activities that traditional pools can.

• Installation Considerations: Proper installation may require structural modifications to homes or properties, which can add to the overall cost and complexity of the job.

By thinking through these pros and cons of pools and how they fit your lifestyle and expectations, you’ll get a good idea of whether an endless pool is right for you.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to costquotes@angi.com. Quotes and personal information will not be shared publicly.