Blind installation costs an average of $759, and most homeowners pay somewhere between $208 and $1,342, depending on the style and number of windows.
Blind installation costs $759 on average, with a range between $208 and $1,342 for an average of eight windows. Installing new window blinds and shades gives any room an instant facelift without the need for extensive remodeling. Plus, the right blinds, correctly installed, can also increase your home's energy efficiency. This guide breaks down all the blind installation cost factors so you can budget for your window revitalization.
On average, blinds cost $5 to $15 per square foot for materials only. The average window is 2 feet by 4 feet or 8 square feet, putting the cost per window for blinds between $40 and $120. You'll also pay $15 to $50 per window for the installation itself, bringing the total per-window cost to $55 to $170.
Remember, too, that the more blinds you have installed at one time, the lower the cost per window because you’ll save on labor costs. Blind contractors will often give you a better deal for bigger jobs, as the cost of transport, wear and tear on vehicles and tools, travel time, and other bits and pieces are only charged once and split across all the window treatments you're updating.
| Size of Window (Inches) | Price Range (All-In) |
|---|---|
| 24 x 36 | $45–$140 |
| 24 x 48 | $55–$170 |
| 36 x 48 | $75–$230 |
| 36 x 72 | $110–$320 |
| 60 x 72 | $170–$500 |
How much money you’ll spend on this project largely depends on the type of blinds or shades you want for your living space makeover. Mini blinds and basic roller shades are the most budget-friendly option, but if you're looking to splurge on your window treatments, then motorized and custom blinds are the most costly.
| Blind Type | Average Cost (All-In) |
|---|---|
| Mini | $20 – $140 |
| Cordless | $30 – $330 |
| Roller | $25 – $350 |
| Solar | $45 – $350 |
| Vertical | $65 – $350 |
| Venetian | $26 – $400 |
| Cellular | $65 – $380 |
| Roman | $65 – $400 |
| Customized | $65 – $650 |
| Motorized or electric | $400 – $600 |
| Bay | $165 – $550 |
| Vertical, Sliding Glass Door | $135 – $650 |
| Outdoor blinds | $90–$300 |
| Waterproof blinds | $45–$100 |
| Smart blinds | $300–$550 |
| Soundproof blinds | $50–$200 |
On average, homeowners pay between $140 and $400 for the labor needed to install new blinds in an entire home. This works out to $15 to $50 per window.
When you decide to get blinds professionally installed, you can hire a local handyperson or a window blind professional. Of course, if the job is larger than average, or the blinds are custom ones that require more time and care, the price could go up significantly. Certain types of custom blinds, like plantation shutters or built-in blinds, often come with the highest labor costs.
There are a few additional factors to anticipate blind installation costs more accurately, including the number of windows, other window treatments, and the blind material, among others.
Just how many windows you’re looking to add blinds to will affect your budget in a major way. It can cost as little as $45 for a single window, but the cost to install blinds per window will go down as the number of windows increases. This is largely because the labor costs and travel costs for your installer to get to your home will decrease per window.
However, if you have new blinds in your whole home, which usually totals eight windows, then you'll pay around $730.
You can also install other types of window treatments, like shades, drapery, or curtains on your windows. The cost to install shades per window tends to be a little lower than going with blinds, but the prices are comparable.
Installing custom shades that fit non-standard windows or are built into the window frame itself, like plantation shutters, will push up your costs, as will choosing high-end drapery. The prices below should help you decide which option is right for you.
| Window Treatment | Average Cost Per Window |
|---|---|
| Standard drapes | $50–$300 |
| Luxury drapes | $500–$3,000 |
| Standard shades | $55–$250 |
| Custom shades | $250–$2,600 |
There are many different types of window blinds and shades out there. Which material you go for is one of the biggest cost factors. Vinyl, plastic, and synthetic blinds cost the least, while wood and leather are the most expensive.
The table below includes typical pricing for pre-made window coverings, so remember that custom options will increase your prices significantly. Also note that these prices exclude labor, which will bump up your total costs as well.
| Material | Price Range |
|---|---|
| Synthetic | $40–$140 |
| Plastic | $35–$150 |
| Aluminum | $40–$180 |
| Bamboo | $45–$200 |
| Faux Wood | $45–$250 |
| Vinyl | $26–$300 |
| Fabric | $65–$250 |
| Wood | $45–$350 |
| Leather | $90–$350 |
Homeowners shopping for blinds sometimes browse by brand. Choosing a specific brand is particularly helpful if you’re looking to match new blinds to existing ones on other windows in your home. Here’s a breakdown of the estimated cost of new blinds according to popular blind brands:
| Blind Brands | Cost Range |
|---|---|
| Hunter Douglas | $200 – $500 |
| Levolor | $60 – $200 |
| Graber | $130 – $600 |
| Blinds To Go® | $30 – $80 |
| Budget Blinds | $200 – $1,000 |
| Bali® | $20 – $60 |
| Bella View | $30 – $90 |
| Hampton Bay | $10 – $75 |
| Achim | $10 – $80 |
| Chicology | $15 – $170 |
| Home Decorators Collection | $25 – $100 |
While many window treatment pros include the cost of removal and disposal in with the price of installation, not all do. Be sure to check to see what’s included before you agree to a contract. If it's not included in the standard service, expect to pay an additional $10 to $30 per window for your pro to remove and dispose of your old window treatments.
Cleaning blinds costs between $100 and $200 for a full house clean. A local blind cleaning company can perform a deep clean of all parts of your blinds and can advise of any early signs of damage or performance issues. Alternatively, you can clean them yourself with a duster, a cloth, and a cleaner that's appropriate for the blind you're cleaning.
Installing standard blinds, shades, or drapes yourself is a relatively straightforward DIY job that will cost you between $40 and $120 per window. That means you’ll save between $15 to $50 per window by doing the work yourself. Of course, DIY installation costs can drastically increase if you spend more on the materials.
You’ll need a power drill to drill holes for the mounting hardware, as well as a level, a hammer, and drywall anchors. If you already have the tools required and some experience with DIY, you should be able to get the job done with relative ease in about a half-hour per window.
If you’re installing motorized blinds or shades, custom window coverings, or high-end blind materials, we strongly recommend hiring a pro. A local window blind installer knows how to place them perfectly the first time, saving you time and trouble. They’re far less likely to make mistakes, too, so you could end up saving money on replacement blinds if you damage yours during the installation process.
In most cases, blind and shade installation just comes with an upfront cost, but over time, you may need to budget for repairs to fix broken blinds and maintenance to keep them functioning properly.
Like everything else in your home, you’ll occasionally have to revisit your blinds to repair or replace damaged components. Certain small repairs are much more cost-effective than installing new blinds altogether. One useful rule is the 50% rule: if the cost of repairing your blinds exceeds 50% of the cost of replacing them, it’s better to go with replacement.
For example, if you need to repair two damaged slats and a vertical blind clip, you’ll pay around $90. Supposing that replacing the blinds costs around $110, you’d only save $20 by sticking to repairs, so it makes more sense to install new blinds that will last another several years.
Use the table below to estimate what your repairs will cost:
| Item Needing Repair | Standard Cost |
|---|---|
| Damaged slats | $10–$35 each |
| Lift cord | $10–$30 |
| Motor | $70–$200 |
| Tilt mechanism | $8–$20 |
| Vertical blind clip | $8–$100 |
Keep in mind that these prices only include materials. The labor cost will depend on your location, the window specialist you hire, and what other jobs you have the professional tackle while on-site.
Some homeowners opt to have other related work done at the same time as blind installation to get everything in order at once. Below are some common add-on services you might want to consider, along with pricing.
Window repair: $180 to $620
Window replacement: $180 to $420
Window tinting: $45 to $660
Window screen replacement: $140 to $480
Low-emissivity (low-E) coating: $80 to $100
Safety and security film: $50 to $70
While installing blinds in one or two bedroom windows may not break the bank, putting new blinds throughout the home can really add up in costs. If you’re looking to save money on blind installation costs, here are a few ways to lower your bill.
Consider Types and Materials: Blind costs can differ based on the materials and the type of blinds. So, unless you have a specific look or function in mind for your windows, keep an open mind when deciding on blinds. Mini blinds or roller shades and blinds made from materials like vinyl or plastic tend to cost less than Venetian blinds or motorized blinds and blinds made from more expensive materials, like wood.
Skip Customizations and Add-Ons: Custom blinds, blinds with motors and remote controls or smartphone connectivity, and soundproofing blinds all come with extra features and functions that can be more convenient. However, that convenience often comes with a higher price tag. If you’re looking to stick to a budget, buy prefabricated blinds over custom options. If you don’t mind getting up to pull the blinds open or shut rather than controlling them with a remote or your phone, skip these add-ons to save more money.
Remove Old Window Treatments Yourself: Even if you’re opting for professional blinds installation, you can still save on installation costs by removing old blinds, shades, shutters, or other window treatments yourself. You may save $10 to $30 per window just by taking out the old treatments and donating, recycling, or disposing of them rather than having the pro handle them.
Get Multiple Windows Treated: A big part of the cost to install blinds and shades is the labor, which accounts for around $15 to $50 per window. You can bring your labor costs down in most cases by getting multiple windows treated at once. Since your technician will already be on site, you stand to save on travel costs and time, and most companies are willing to give a per-window deal if you agree to install blinds over more windows. Your total cost will go up, but your per-window cost will come down.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We’ve surveyed thousands of real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to costquotes@angi.com. Quotes and personal information will not be shared publicly.
The average lifespan of most blinds is between six and eight years. High-quality wood blinds can last 20 years or more, but lower-budget blinds may only last for around three to five years. To help your blinds stay in good shape long past their predicted lifespan, make sure you clean your blinds gently—and often—and give them regular maintenance.
When it comes to curtains vs. blinds, installing blinds is usually less expensive than installing curtains. Blind installation is usually quick and easy, taking between 15 and 30 minutes per window. Curtain installation, on the other hand, can take an hour or more per window. Plus, curtains usually cost more than blinds because they use more material.
It’s important to know what you want and how you intend to use your blinds when it comes to window treatments. Will your blinds be decorative, or do they need to be very functional, keeping the sun out of your favorite napping spot, perhaps? Who’s going to be using the blinds? How much can you spend? These are all questions you should ask before you take the next step of selecting the blinds that work best for you.
