How Much Does It Cost to Install Aluminum Gutters? [2025 Data]
Installing aluminum gutters costs $2,400 on average, and it commonly costs between $800 and $4,000, depending on the scope of the project.
If it's time to add new rain protection to your home, you may be researching aluminum gutter cost to see how much you'll pay for a new system. When adding new aluminum gutters, the average cost is $2,400. However, most homeowners are paying between $900 to $3,300 for installation. The rate breaks down to $7 to $13 per linear foot for most projects. Quality gutters that are installed properly are essential for funneling rain, melted snow, and moisture away from the home to prevent water damage. By getting the right gutters, you can avoid breakage and dents while also enjoying an aesthetic that adds curb appeal. Here's a look at the factors that go into the cost of aluminum gutters.
Aluminum Gutter Installation Cost Per Linear Foot
| Gutter Length (Linear Feet) | Cost Range |
|---|---|
| 50 | $350–$600 |
| 100 | $700–$1,200 |
| 150 | $1,050–$1,800 |
| 200 | $1,400–$2,400 |
Overall, home size is the single biggest factor in determining aluminum gutter installation cost. With gutter costs ranging from $7 to $12 per linear foot, a simple single-story home with a footprint of 150 linear feet once all four sides are added up will cost $1,050 to $1,800.
Gutter Professional Costs
If you're planning to hire a gutter installation company to install your new gutters, most companies will bundle labor costs with the cost per linear foot to provide you with a flat estimate. Expect labor costs to make up between 20% and 50% of the total job cost, or between $1.40 and $6 per linear foot, depending on the specifics of your project.
When calculating the cost to install gutter guards, contractors generally look at the size of your home to determine the number of hours needed to install the amount of gutter materials needed. When choosing seamless gutters, installers will spend several extra hours cutting gutters to match the length and contours of your home.
Aluminum Gutter Installation Cost Factors
While aluminum gutter installation cost is generally straightforward, there are several factors that can drive costs up or down. Your home's size is the first major factor. Your final project cost will also be determined by any add-on features you request during installation.
Seamed vs. Seamless Gutters
Homeowners can choose between seamed and seamless gutters when having new aluminum gutters installed. Due to the fact that they need to be cut to fit the blueprint of a home by a gutter installer, seamless gutters can be significantly more expensive compared to seamed gutters that simply snap in place. While a seamed aluminum gutter costs closer to $7 to $10 per foot, seamless gutters cost more than $9 to $13 per linear foot. Seamless gutters are considered more durable, less vulnerable to breakage, and more attractive compared to seamed gutters.
Existing Gutter Removal
If you're having gutters replaced, your old gutters will need to be hauled away for proper disposal. Most contractors will calculate the cost of removal and disposal into your quote. If paying for gutter removal separately, the cost can range from $80 to $300. If you're planning to haul your gutters away on your own because you'd like to recoup some of the costs for scrap metal, the current resale value of aluminum scrap is around $0.50 per pound. For homeowners, that adds up to about $20 for their efforts.
Gutter Guards
Many people upgrade their gutters at the point of installation by adding gutter guards when having new aluminum gutters placed on their homes. Gutter guards are gutter protection systems that go over gutters in order to keep out large pieces of debris. They can be vital in areas where leaves and other debris fly onto roofs. By keeping debris out, gutter guards ensure that water can flow through gutters without major clogs that can lead to water damage and mold.
With an average price of $1,200, a gutter guard can cost almost as much as new gutters. With the average price per foot for new gutter guards somewhere between $5 and $9, most homeowners are paying $700 to $1,700 for guard systems. The type of guard system installed can dramatically alter cost.
| Add-On Options | Cost |
|---|---|
| Plastic screen | $80–$200 |
| Foam | $400–$650 |
| Brush | $600–$850 |
| Perforated Aluminum | $600–$1,050 |
| Steel Screen | $800–$1,450 |
| Micro-mesh | $900–$1,550 |
| Reverse Curve | $1,150–$4,300 |
DIY vs. Hiring a Pro
Installing aluminum gutter guards is potentially a DIY job for someone who has minimal experience. With labor costs out of the way, you may be able to get project costs down to just $1 to $2 per linear foot for your gutters. However, you will also need to factor in costs for other parts of the gutter system. This includes an average cost of $30 for gutter hangers and brackets, $20 per tub of gutter sealant, $60 for a box of lag screws, and $200 and $300 to pick up a hacksaw, drill, and screwdriver if you don't already have these tools at home.
There are some situations where DIY aluminum gutter installation is not advised because using local gutter companies is a better choice for being safe. If your home is more than one story high, climbing to the roof line to do work can be hazardous. If you're selecting seamless gutters, the complexity of cutting and fitting the various materials is far more than the average DIY homeowner can handle. Improperly preparing or installing gutters leaves a home vulnerable to leaks and water damage that can lead to mold, mildew, roof damage, and a faulty foundation.
Repairing vs. Replacing Aluminum Gutters
Gutter repair costs are roughly in line with new gutter installation costs on a linear foot basis. Depending on the extent of the damage and the number of linear feet involved, repairing a damaged gutter section is significantly less expensive than replacing the entire system.
However, there are situations that will require replacing your gutters rather than repairing them. Those situations often include sagging gutters where the facia that supports the system has damage due to water penetration. Additionally, widespread gutter damage can also warrant replacing the system instead of patching it up.
Gutters have a useful lifespan of roughly 20 to 50 years. However, most gutter lifetimes fall on the shorter end of that scale. If your gutters are over 20 years old, there's a good chance that replacing them will be more cost-effective in the long run than putting money toward multiple repairs.
How to Save Money When Installing Aluminum Gutters
While the cost to replace your aluminum gutters depends primarily on linear feet and the size of the gutter you need to manage the rainfall in your location, there are some things you can do to help control the overall project cost.
If color isn't an important factor to you, choosing an in-stock or non-custom color will keep prices closer to the low end of the cost scale.
As soon as your new gutters are up and running, begin a proper maintenance program for them, including regular cleaning. While the approach doesn't save money initially, your wallet will be happier in the long run by avoiding unnecessary repairs and extending the system's lifespan.
Ask around to various installers about gutter installation deals.
Consider having your pro install your gutter system during one of the off-peak seasons, such as early spring or late autumn, for the best chance at hitting low-demand pricing cycles.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to costquotes@angi.com. Quotes and personal information will not be shared publicly.
Frequently Asked Questions
New aluminum gutters can last up to 30 years when cared for properly. Aluminum is likely to last longer in low-humidity areas that do not expose the metal to salty air. However, aluminum is a good choice for cold, wet, and snowy climates.
The installation process for your home's new gutters will only take between a couple of hours and a full day, depending on complexity. However, factoring in the demolition of the existing system and preparation work during a replacement situation can add another few hours to a full day of work.
Painting exterior metal on your home, including the gutter and downspout system, is possible. However, the process requires significant preparation work so the paint sticks well and lasts, making the task worthwhile. Thorough cleaning, caulking seams, and using high-quality primer and paint are all necessary for achieving the best results. The cost to paint gutters averages $160 to $960.
